Solar Powered Soil Moisture Probe

Name: Solar Powered Soil Moisture Probe
SKU: 26994
Price: 40.00 USD
Availability: InStock

Solar powered soil moisture probe to use with home assistant

Designed by The Garden Tinkerer in Canada

2022-06-07T19:27:55.461Z-016F2625-ADCE-4D14-9876-2223CD564253.JPG

$40.00

Quantity*

+ —

Soil Sensor Kits

Only 6 left in stock, order now!

Buy with confidence.

Our Tindie Guarantee protects your purchase from fraud. Learn More

Solar powered soil moisture probe to use with home assistant

Solar powered soil moisture probe that uses an ESP32 too broadcast over BLE capacitance data to an esp32 running esphome to link to home assistant. ESP32 running esphome not included. Once powered th…

Solar powered soil moisture probe that uses an ESP32 too broadcast over BLE capacitance data to an esp32 running esphome to link to home assistant. ESP32 running esphome not included.

Once powered the soil moisture sensor will take readings and broadcast the reading over BLE for 1 minute and then will go into deep sleep for 4 hours and then repeat.   

ESPHome yaml sample code can be found here on how to set up an ESP32 running ESPHome to become a BLE Tracker device.

https://github.com/an124pilot/esphome-BLE-tracker.git  

The sensor is uncalibrated and will send raw data values over BLE which can then be used to calibrate within Home Assistant or any other system. Tips for calibration are to use a fully saturated pot of soil and a pot of dry soil.

PRODUCT OPTIONS	ESP 32	Soil Moisture Sensor	3.7v 1400mah Battery	Small Solar Panel	Medium Solar Panel	Large Solar Panel	3D Printed Case
Soil Sensor with ESP32	X	X	-	-	-	-	-
Soil Sensor with ESP32 and Battery	X	X	X	-	-	-	-
Soil Sensor with ESP32 and Small Solar Panel	X	X	-	X	-	-	X
Soil Sensor with ESP32 and Medium Solar Panel	X	X	-	-	X	-	X
Soil Sensor with ESP32 and Large Solar Panel	X	X	-	-	-	X	X
Soil Sensor with ESP32, Battery and Small Solar Panel	X	X	X	X	-	-	X
Soil Sensor with ESP32, Battery and Medium Solar Panel	X	X	X	-	X	-	X
Soil Sensor with ESP32, Battery and Large Solar Panel	X	X	X	-	-	X	X

*Garden Tinkerer is not responsible for any water damage to product once it is used. Edge of PCB board is sealed, but may require resealing with epoxy if edges become damaged. It is also the buyers responsibility to properly seal the 3D printed case once you receive the soil sensor. Best recommended way is using outdoor waterproof silicon. 3D case will also turn yellow in the sun.***

No country selected, please select your country to see shipping options.