Seven Decade Prog Resistor 1R - 9999999R 1% 500mW

Name: Seven Decade Prog Resistor 1R - 9999999R 1% 500mW
SKU: 983
Price: 18.95 USD
Availability: InStock
Rating: 5.00 (12 reviews)

(12 Reviews)

This is an easy to program decade resistance designed to assist you in rapid electronics prototyping

Designed by gerrysweeney.com in United Kingdom

This seller is taking a break. Sign up below to get an email when they're back!

Seven Decade Prog Resistor 1R - 9999999R 1% 500mW 1

Seven Decade Prog Resistor 1R - 9999999R 1% 500mW 2

Seven Decade Prog Resistor 1R - 9999999R 1% 500mW 3

Seven Decade Prog Resistor 1R - 9999999R 1% 500mW 4

Seven Decade Prog Resistor 1R - 9999999R 1% 500mW 5

$18.95

On A Break

This is an easy to program decade resistance designed to assist you in rapid electronics prototyping

Overview This is an easy to program decade resistance designed to assist you in rapid electronics prototyping to support design engineers or education requirements. This board is fully assembled and…

Overview

This is an easy to program decade resistance designed to assist you in rapid electronics prototyping to support design engineers or education requirements.

This board is fully assembled and ready to use

I have also made a complimentary Five Decade Programmable Capacitor

Details

If you use a breadboard or similar for prototyping for analog circuits, or micro controller circuits like Arduino there will always be that time where you need that specific resistance but do not have it to hand, this is where a programmable resistor comes into its own. This unit can be easily programmed from 0R through to 9.999999MR in 1R steps, its easy to dial in the specific value you need within a few seconds.

It is also possible to easily remove the terminal block connector and replace with 4mm Banana Sockets if you need to - there are already holes in the board to accommodate this.

Technical Specs and User Guide

No country selected, please select your country to see shipping options.

Change Destination Country:

Review Breakdown

Average Ratings

Product: (5.00)

Documentation: (5.00)

Shipping: (5.00)

Communication: (5.00)

Alan | April 8, 2021

Indispensible tool for those on a budget! Buy TWO.

I bought 2 of these for developing voltage divider settings for Linear LDOs, buck/boost regulators etc.; calculations and simulations just don't seem to get you there without some kind of real-world mockup. I fixed a problem I had within the first 5 minutes of use - it sure beats soldering and desoldering 0603 and smaller components for those of us with older eyes. At the price they are unbeatable; I'm wondering why I didn't buy four.

I'd love to see a 0.1%, 500mW version. I know, I know, it would be more expensive but hey, it would give me a higher level of confidence before going into production.

Michel | Feb. 14, 2021

I recommend it.

The build quality is very good. The precision and the easy operation allow me to use it in the assemblies and to confirm the good functioning of my multimeter. I mainly use values of three contiguous decades to obtain a constructed value equal to the real value. Excellent product, I recommend it.

Marshal | July 31, 2020

Exactly the product I wanted and could not find!

I was looking for a decade resistance box but wanted a small unit that was easier to work with around smaller boards and was easy to store. I also didn't really want to put one together myself, just wanted to get to work. This unit is perfect, it's small, nicely constructed and does just what it's supposed to.

John | Sept. 13, 2019

Very nice item, works well.

I recently purchased this item and I am very pleased with it. I did not want to have to build one myself and now I won't need to.
Arrived timely and well packed and works as described. I have added plastic feet in the corner holes to allow a clearance underneath,
preventing the possibility of shorting the contacts on the underside. I would consider future purchases, perhaps with a higher mW capacity.
Altogether an item of excellent quality.

Response from gerrysweeney.com | Sept. 13, 2019

Thank you for your review and feedback.
Gerry

Mike | May 29, 2017

Great Idea & High Quality Construction Decade Resistor

I was about to build or buy a resistor decade/substitution box when I came across Gerry's website, and I was impressed by his 7 Decade solution. I bought one and it was shipped safely to me in the US. You can't find better quality, don't go for the recent Chinese knockoffs, Gerry's is the original and the price is quite reasonable for such a good product. Just add four standoffs as legs, or box it up in a 3D printed box and you're ready to go.

Response from gerrysweeney.com | May 29, 2017

HI Mike,
Thanks again for the kind review, much appreciated.
Gerry

David | March 25, 2015

A Great Product at a Great Price!

I ordered and received 2 of the units and they work great! I was about to spend much more for 1 resistance decade box, until I found these, which are perfect.

Response from gerrysweeney.com | March 25, 2015

Hi David,
Thank you for the review, I am glad you like them, thank you for the order.
Gerry

Joe | May 6, 2014

very handy

Good little unit.

Andras | April 27, 2014

Great tool!

I love the idea to create a decade this way, very easy to use.
Since it does not have switches it will not have switch contact problems developing with time.
Also, good quality components, keeps the 1% precision throughout the whole range.

Response from gerrysweeney.com | April 27, 2014

Hi Andras,

Thank you for the review, I am glad you like the tool and the simplicity behind the idea. Thank you for purchasing one.

Gerry

Curradi | April 9, 2014

Nice!

Well built, simple, cheap and functional! Satisfied!

Chris | Oct. 29, 2013

Well made, very useful

Works as it should. Nice and simple. Clean design. I like it!

Response from gerrysweeney.com | Dec. 18, 2013

Thank you for the feedback Chris. glad you like it.

Robert | Oct. 2, 2013

Nice little board

I'll make it short: it works as advertised and appears to be within specifications on all ranges.

It would make a nice DIY kit as well, with all those large components.

Response from gerrysweeney.com | Dec. 18, 2013

Thank you for the feedback. I had them made because I could not face the prospect of assembly :)

Mats | July 23, 2013

Good bang for the bucks

I bought this Resistor Decade a while ago and so far used it when testing out a RC low pass filter and also for determining the current limiting resistor for a LED to get just the right amount of light at 3.3 volts.

Using standard 0.1" jumpers instead of thumbwheel- or rotary switches to get the cost down is a really good idea. I wish I got that idea myself :)

If pressed to come up with some bad things about it I can only think about two really minor improvements: Use gold plated headers and re-arrange the resistors at the bottom a bit so you could fit "self adhesive rubber bumpers" on the bottom to get it up from the desk. (My desk is usually filled with solder blobs and cut component leads)

So far the contact resistance with the tin plating is perfectly fine, but I've always had a distrust of anything non-gold when it comes to contacts.

But I'm very happy with my unit and would give a 100% recommendation to get one to anyone who asks me about it.

Response from gerrysweeney.com | Aug. 17, 2013

Thank you for the lovely review. Gerry

+ Show 7 more

$18.95

On A Break

gerrysweeney.com

Ruislip, Middlesex, United Kingdom

Ships from United Kingdom.

19 Reviews | 311 Orders

View Store

We thought you'd like these too…

ezPick Manual Pick and Place Machine

ABACOM Technologies Inc.

$749.00

Flipper: Carbon

flipper.io

$500.00

Portable Micro AVR Programmer

JasonKits

$38.98

Chips on a Stick

underproofed electronics

$10.00

Tindie

Seven Decade Prog Resistor 1R - 9999999R 1% 500mW

On A Break

This is an easy to program decade resistance designed to assist you in rapid electronics prototyping

Overview

Details

Rates to

Review Breakdown

Average Ratings

Indispensible tool for those on a budget! Buy TWO.

I recommend it.

Exactly the product I wanted and could not find!

Very nice item, works well.

Response from gerrysweeney.com | Sept. 13, 2019

Great Idea & High Quality Construction Decade Resistor

Response from gerrysweeney.com | May 29, 2017

A Great Product at a Great Price!

Response from gerrysweeney.com | March 25, 2015

very handy

Great tool!

Response from gerrysweeney.com | April 27, 2014

Nice!

Well made, very useful

Response from gerrysweeney.com | Dec. 18, 2013

Nice little board

Response from gerrysweeney.com | Dec. 18, 2013

Good bang for the bucks

Response from gerrysweeney.com | Aug. 17, 2013

On A Break

gerrysweeney.com

We thought you'd like these too…

ezPick Manual Pick and Place Machine

Flipper: Carbon

Portable Micro AVR Programmer

Chips on a Stick