All-in-one Analog-Digital 4-Input/4-Output Module and Switch

The STTISSM WiFi module reads dedicated 1 analog and 1 digital inputs and 4 configurable digital inputs/outputs and sends the values to a configurable server and port (optimized and formatted for dweet.io and freeboard.io). The digital outputs are suitable to control relays. 4 LEDs indicated when the outputs are active. This module can handle ONE analog and/or digital sensors such as distance, gas, water moisture, color, etc. Please select one sensor in the Product Options tab; available sensors:

WATER MOISTURE MQ2 - LPQ, Propane and Hydrogen MQ6 - LPG, Iso-butane, Propane MQ135 - NH3, NOx,Alcohol, Benzene, Smoke, CO2
MQ7 - Carbon Monoxide MQ8- LPG, Hydrogen, Alcohol, Cooking fumes DISTANCE ELECTRICAL CURRENT

REST compatible and JSON formatted. Can integrate easily with dweet.io and freeboard.io so you can monitor the data realtime and communicate back with the module, see example dashboard in the pictures and we will walk you through how to create your own awesome dashboard. The firmware can be updated to the latest one by sending a simple command to the module 5 Volts DC power

5-60 ma current consumption

Configurable to 4 inputs or 4 outputs digital data.

1 dedicated Analog input, 10bit, 0-1 Volt.

1 dedicated Digital input

Server address, port and heartbeat are configurable

Update firmware via a simple command

Data can be sent to dweet.io a and displayed with freeboard.io (see pictures)

To setup and use this item, a basic knowledge of WiFi configuration, TCP communication, server communication is required.

WiFi enabled. 1 analog input and 5 digital input/outputs! Can drive up to 4 relays or connect to sensors (Arduino sensors for example) This module is configurable and easy to setup, just type a simple command on your browser. It transmits the data via TCP to a configurable server and port at regular intervals which can also be configured (heartbeat). It features an analog input, a dedicated digital input and 4 pins that can be configured via a dip switch and act as inputs from a sensor or outputs to control relays. This is flexibility! A simple API allows control of the module. Example of the API:

RD: Read data. The module will return the status of the pins in JSON : {"IO1":0,"IO0":1,"IO3":0,"IOA":75,"IO4":0,"IO2":0}

HBxxxxx: change the heartbeat to xxxxx, where xxx is a value in milliseconds. Example: HB5000 for 5 seconds heartbeat; HB60000 for 1 minute heartbeat.

RS: Resets the module and wipe out SSID, Password, Server and Port configuration

RB: Reboots the module

IO10: sets IO1 to output mode

IO11: sets IO1 to input mode

IO20: sets IO2 to output mode

IO21: sets IO2 to input mode

IO30: sets IO3 to output mode

IO31: sets IO3 to input mode

IO40: sets IO4 to output mode

IO41: sets IO4 to input mode

SW10: Switches IO1 to 0 (OFF). Only active if IO1 is set to output

SW11: Switches IO1 to 1 (ON). Only active if IO1 is set to output

SW20: Switches IO2 to 0 (OFF). Only active if IO2 is set to output

SW21: Switches IO2 to 1 (ON). Only active if IO2 is set to output

SW30: Switches IO3 to 0 (OFF). Only active if IO3 is set to output

SW31: Switches IO3 to 1 (ON). Only active if IO3 is set to output

SW40: Switches IO4 to 0 (OFF). Only active if IO4 is set to output

SW41: Switches IO4 to 1 (ON). Only active if IO4 is set to output

If the module receives the command successfully it returns the JSON string: {“STATUS”:”OK”}

We can customize the firmware to match your needs. Uses JSON API. Perfect for Makers or DIY!

1 analog input, 10 bit (0-1 Volt) 1 digital input 4 digital pins that can be either input or output can drive up to 4 relays 5VDC TX/RX terminals

Actual control module may differ as we are continuously making improvements to the design

To setup and use this item, a basic knowledge of WiFi configuration, TCP communication, server communication is required.