WiFi Wireless Gas Sensor detects gas presence in the proximity of the sensor and sends a signal via TCP to a server IP address. Please specify sensor type: Carbon Monoxide, Liquified Petroleum Gas, Hydrogen, Butane/Methane.

WE CAN CUSTOMIZE THE FIRMWARE TO MODIFY THE BEHAVIOR ACCORDING TO YOUR NEEDS FOR ORDERS OF 10 OR MORE, INCLUDING SUPPORTING PROTOCOLS LIKE MQTT, CONTACT US FOR PRICING AND DETAILS

WIFI Wireless Gas Sensor. It detects gas and sends a signal via WIFI to a selectable IP address and port number via TCP protocol. The board can be configured via a web browser to connect to your wireless router. The board can be connected to a serial interface for debugging or reprogramming of the MCU ESP8266, and comes with TX-RX connectors, reset and flash switches, making it flexible for experimenting and prototyping. Setting up the board:

• Connect the 5V power • Press board reset button 3 times

• From your computer, check available wireless networks and connect to a network which name has the form ESP_STATION_xxxxxxx

• When prompted, enter the password to the ESP_STATION. The preset password is ‘espadmin’

• Wait until your computer successfully connects to ESP_STATION_xxxxxxx

• In your browser enter a string of the form: http://192.168.4.1/?SSID=Your_wifi_SSID&Password=Your_wifi_password&Server=Listening_server_address&Port=Listening_server_port and press return. For example: http://192.168.4.1/?SSID=ATT994&Password=bluefish&Server=192.168.1.73&Port=9999&Freq=5000

Wait a few seconds and the board should be all setup, connected to your wifi network and on stand by to send events at the frequency Freq (heartbeat). On the receiving side, you will be receiving events on the Listening_server_address you selected and entered. The events will come on Listening_server_port, so all you have to do is listening on that port. The events received have the form:

XXX Gas detected from IP address 192.168.1.xxx