This PCB allows you to invert the pixels on your Game Boy Pocket (MGB)
If you've ever backlit a Game Boy you probably noticed how washed out the screen might be. By rotating the polarizer 90° and installing a bivert module, you invert the pixels twice resulting in a cri…
If you've ever backlit a Game Boy you probably noticed how washed out the screen might be. By rotating the polarizer 90° and installing a bivert module, you invert the pixels twice resulting in a crisp contrast. While not required for the Game Boy Pocket, this module still improves the contrast. This bivert module is probably the easiest one to install out there, however it is still quite advanced and will require a steady hand to install it. I would not recommend it if it's your first time soldering.
Needed and recommended tools :
-Soldering iron with a fine tip
-Fine diameter solder (0.5-1mm)
-Tweezers
-Double sided tape
-Flux
Install guide is available in the Documentation tab, read it before purchasing anything. Contact me if you have any question.
I'm not responsible for any damage done to your system.
Product will most likely be discontinued after this stock is gone.
No country selected, please select your country to see shipping options.
No rates are available for shipping to .
Enter your email address if you'd like to be notified when Bivert PCB for Game Boy Pocket can be shipped to you:
Thanks! We'll let you know when the seller adds shipping rates for your country.
Rates to
Shipping Rate
Tracked
Ships From
First Item
Additional Items
:
Review Breakdown
5
1
4
0
3
0
2
0
1
0
Average Ratings
Product:
(5.00)
Documentation:
(5.00)
Shipping:
(5.00)
Communication:
(5.00)
Rudy |
June 9, 2019
The best bivert chip for MGB out there
I used to mod game boy and game boy pocket since 2015 so I passed through a plethora of bivert chip modification, from chip only to big and bulky ones. The opportunity for not passing a lot of cables through the MGB shell and pcb arrived with this amazing and tiny bivertion board, all is perfect on this module, and the installation is very simple indeed! You must cut the traces or lift the pin, this is your choice, but after that you just have to solder 6 points using Flux (very reccomended) or an hot air gun with liquid solder (simpler). The pads across the pins are chiseled for helping your solding tip to flow the solder in. You must pay attention when doing this procedure with the iron solder or you'll have to use the wick ( banned all the vacuum chamber desolderer or you risk to break the pocket's pins!!) To unbridge the pins, but after than that you can make this operation in about 5 minutes if you are used to the solder iron, less time if you use the hot air gun. I highly recommend the Hidarite bivert module for the pocket, this is a big step up on the gameboy pocket mod scene! Thank you Valentin!
By clicking Register, you confirm that you accept our Terms & Conditions
What is a Tindarian?
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
How does one become a Tindarian?
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!
/i/313151/products/2019-04-18T17%3A02%3A09.185Z-IMG_20190418_153745_HDR.jpg?1606306133)
