Product Introduction:

• Operating Voltage: 4.5-5.5V (input port) VCC:connects with power positive; GND:connects with power negative.
• Output Way:the module power on defaults output at a low level; after pressing the remote control, it will output at a high level; OUT1-OUT4 are respectively 4-channel output ports.
• Max Output Current:every channel max output current is within 10mA
• Quiescent Operating Current: 3mA
• Receiver Board Size: 20306mm
• Receiving Distance: 15-100m
• Operating Mode: self-lock, inching, interlock modes can be set freely
• Operating Indication: D1 (learning indicator lamp and receiving signal indicator lamp)
• Output Level:output high level is equal to or less than VCC voltage

Learning Method:

• After power on, press the learning key, the learning indicator lamp will flash for once; it represents the first channel trigger is successful; then press the key on remote control you want to learn, the learning indicator lamp will flash for twice, it represents the first channel learning is successful.
• After power is on, press the learning key, the learning indicator lamp will flash twice; it represents the second channel trigger is successful; then press the key on remote control you want to learn, the learning indicator lamp will flash twice, it represents the second channel learning is successful.
• After power is on, press the learning key, the learning indicator lamp will flash three times; it represents the third channel trigger is successful; then press the key on remote control you want to learn, the learning indicator lamp will flash twice, it represents the third channel learning is successful.
• After power on, press the learning key, the learning indicator lamp will flash four times; it represents the fourth channel trigger is successful; then press the key on remote control you want to learn, the learning indicator lamp will flash twice, it represents the fourth channel learning is successful.
• Clear Way: when power is off, press the learning key; then power on, the learning indicator lamp will flash four times; it represents module clear is successful.

Self-lock, Inching, Interlock Function Switch Operation:

• Interlock: when power is off, press the learning key and then power on; the learning indicator lamp will flash once, and loosen the key; then it sets the interlock output (press the key on remote control, the corresponding channel has output while other channels are closed and no output)
• Self-lock: when power is off, press the learning key and then power on; the learning indicator lamp will flash twice, and loosen the key; then it sets self-lock output (press the key on remote control, the corresponding channel negation and exerts on impact on other channels state; loosen the remote control, the output state will remain)
• Inching: when power is off, press the learning key and then power on; the learning indicator lamp will flash three times, and loosen the key; then it sets inching output (press the key on remote control, the corresponding channels have output; if you loosen the remote control, the output will be stopped)