1.Description:

600W boost power module, non-isolated boost module. It can convert DC 10V-60V to DC 12-60V.

2.Feature:

• Its conversion efficiency is high.
• It has CV-ADJ potentiometer and CC-ADJ potentiometer,which can adjust the output voltage and current.
• It has a wide range of applications.It can charge batteries,lithium batteries,etc.
• It uses a high thermal conductivity aluminum substrate design.

3.Parameter:

• Product Name:600W Boost Power Module
• Input Voltage:DC 10V~60V
• Input Current:10A(Max)
• Static Working Current:10mA
• Output Voltage:DC 12V~60V
• Output Current:10A
• Constant Current Range:0.2A~10A
• Working Frequency:150KHz
• Conversion Efficiency:92%~96%
• Work Temperature:-40℃~85℃
• Work Humidity:5%~95%RH
• Size:855221mm

4.Output Voltage Adjustment:

• Adjust the CV-ADJ potentiometer,according to your battery or LED,set the output voltage to the voltage value you need.
• Turn the voltage down clockwise,and turn it up counterclockwise.

5.Output Current Adjustment:

• Adjust the CC-ADJ potentiometer clockwise about 20 turns,set the output current to the minimum,connect the LED,and adjust the CC-ADJ potentiometer to the current you need.
• For battery charging,after the battery is discharged,connect to the output and adjust the CC-ADJ to the current you need.(When charging,you must use the discharged battery to adjust,because the battery is left The more power,the lower the charging current.)
• Please do not adjust the current in a short-circuit mode.The circuit structure of the booster module cannot be adjusted in a short-circuit mode.

6.Instructions for Use:

• Constant voltage adjustable range:DC12-60V (clockwise to decrease,counterclockwise to increase)
• Constant current adjustable range:0.2A-10A (clockwise to decrease,counterclockwise to increase)
• When the input current exceeds 6A,heat dissipation needs to be strengthened (the aluminum substrate is attached to the flat metal part).
• The input voltage cannot be lower than 10V and exceed 60V.
• The maximum input current cannot exceed 10A,and the power cannot exceed 600W.
• When using,it must be ensured that the input voltage is lower than the output voltage by more than 2V.
• Before connecting the load,please adjust the required voltage and current when there is no load (the no-load voltage should be increased by 3-5V when the current is constant).
• When using a switching power supply or other secondary power supply,please make sure that the power of the power supply should be more than twice the power of this module.

7.Note:

• The input and output cannot be reversed.
• The input voltage should not be lower than 10V.Too low input voltage will damage the power supply.(Be careful to prevent over-discharge of the battery when using the battery)
• When working,the input and output voltage and current can not exceed the maximum value,so as not to damage the power supply.
• Pay attention to ventilation and heat dissipation when working with full load for a long time to extend the service life of the power supply.
• Pay attention to dust and moisture.

8.Application:

• DIY a regulated power supply,input 12V,output can be adjusted from 12-50V.
• To supply power to your electronic equipment,you can set the output value according to your system voltage.
• As the vehicle power supply,it can supply power to your laptop and various digital products.
• DIY a high-power notebook mobile power supply.
• The solar panel stabilizes the voltage.
• Charging batteries,lithium batteries,etc.
• Drive high-power LED lights.

9.Package:

1pcs 600W Boost Power Module