Description:

• VARIOUS FUNCTIONS: The stepper motor controller can adjust the angle, speed, direction and delay time of the motor. The micro stepping resolution can reach 1/128, enabling you to control the motor more accurately.

• 9 OPERATING STATES: The stepping motor controller has 9 built-in fixed working modes, including forward rotation, reverse rotation, delay, cycle, etc., so you can select the working mode more quickly. In addition to the built-in parameter working mode, you can also control through external buttons or other drives.

• HD LCD DISPLAY: This stepper motor controller has a HD LCD display, so you can read the parameters very easily and set various parameters more precisely. The module also has a power failure memory function to prevent your parameters from being lost.

• FORWARD AND REVERSE ROTATION: The stepper motor controller can change the direction of motor rotation by pressing a button, and you can also select two modes, automatic or manual, by selecting the working mode, which is more widely used.

• 13 KINDS OF MENU SETTING FUNCTIONS: The stepper motor controller including cycle number, motor turns, delay time, number of pulses, forward speed, flip speed, etc. The external buttons and knob encoder make it very easy to set the parameters.

Parameters:

• Product name:ZK-SMC01 CNC Stepper Motor Controller
• Input voltage:DC 5V-30V
• Control shafts:Single axis
• Suitable motor:42/57 step motor(Nema17/23 motor)
• Control speed:0.1-999RPM
• Forward pulses number:1-9999999
• Reverse pulses number:1-9999999
• Loop times:1-9999
• Forward delay time:0.0-999.9s
• Reverse delay time:0.0-999.9s
• Subdivision:1/2/4/8/16/32/64/128
• Acceleration and deceleration control:Yes
• Input reverse polarity protection:Yes
• Control modes:Auto/Manual/Setup/UART
• Work Temperature:-20℃~85℃
• Work Humidity:5%~95%RH
• Module Size:79x43x41mm

Using Guide:

• 1. On the operation interface, rotate the encoder to adjust the speed, CW key -- forward rotation, CCW key -- reverse rotation, RUN/STOP key -- operation stop exit.

• 2.Press and hold the encoder to enter the menu setting.

• 3.On the menu setting interface, rotate the encoder to adjust and change the parameter codes F-01~F-13.

• 4.Long press the encoder, save the parameters and exit to enter the operation interface.

• 5.On the menu setting interface, briefly press the encoder to enter the parameter setting state of F-XX corresponding menu, the parameter flashes, and then briefly press Shift to rotate the encoder to adjust the parameter.

• 6.Press the RUN/STOP key briefly to exit the parameter setting and return to the number adjustment interface of the main menu.