1.Description:

It is a PD2.0/3.0 decoy.It is often used to use power banks with PD protocol such as power banks or chargers to trick the corresponding voltage to power notebooks and routers.

2.Feature:

• It supports PD3.0 and PD2.0 voltage deception output, and the mode can be switched freely.
• It has a key lock function to prevent misoperation.
• It has an LED output indicator to show the working status.
• The parameters are automatically saved, and the last decoy setting is executed when the power is turned on again.
• Ultra-low power consumption, support 100W output.

3.Parameter:

• Product Name:PD2.0/3.0 Decoy
• Input Voltage:DC 5V
• Deceive Output Voltage:5V>9V>12V>15V>20V
• Maximum Output Voltage:20V
• Maximum Output Current:5A
• Work Temperature:-25℃~85℃
• Work Humidity:5%~95%RH
• Size:44x20x15mm

4.Instructions for Use (must use a power supply with PD protocol):

• Press and hold the S- button, insert the module into the power supply, and then reset to 5V output (">>" means power on).
• Press and hold the S+ button, and then insert the module into the power supply. At this time, switch whether to turn on the key lock and save the state after power-on. If the key lock is unlocked, it must be unlocked to adjust the voltage after power-on to prevent misoperation.
• After power on, press and hold S+ button without letting go, then press S- button, and unlock when there is a button lock.
• After powering on, press and hold S- button without letting go, then press S+ button to lock the button.
• Quick start: Plug the board into the PD power supply. At this time, the LED light indicates the current setting decoy voltage. If it is not on, it is the default 5V.
• Adjust the output voltage: The board is locked by default, and you need to unlock it first. The method is to press and hold S+ button and then press S- button. At this time,the unlocking is complete and you can release the button. Then click S+ button to increase the voltage or click S- button to decrease the voltage.

5.Instructions for Use of Test Function:

• Press S- button and S+ button at the same time and then power on, the module enters the test mode, and the output voltage will automatically cycle from 5V>9V>12V>15V>20V. The voltage change time can be adjusted by S+ button and S-button, in seconds.
• This function is a test function, the mode is not saved, and the switching time can be saved.

6.Interface Description:

• Type-C Interfeace Male:Type-C male connector:Connect PD power supply as input, which can input 20V 5A voltage and current.
• Type-C Interfeace Female:Used as an input to connect to a PD power supply, or as an output interface, which can output 20V 5A voltage and current.
• USB-A Female Interface:As an output interface, it can output 20V 3A voltage and current.
• Positive and negative wiring pads:as an output interface, it can output 20V 5A voltage and current.

7.Package:

1pcs PD2.0/3.0 Decoy