Description:

• XY-C160H is a high-power 160W*2 Stereo 2.0 Bluetooth 5.0 Audio Amplifier Module which also can be control by APP Sinilink. 2.0 channels audio signal output.
• Built-in amplifier module therefore it can connect to loudspeaker directly.
• It supports Bluetooth music receive and AUX/USB audio input. It is ideal for DIY wireless Bluetooth speakers and transponders.

Features:

• 160W x2 Dual Channel Stereo.It has a built-in TDA7498E amplifier chip to provide 160W*2 high power drive capability with DC12V-38V work voltage.Recommended to use more than 5A current to get more clear, bright and high fidelity sound.

• High Current Power Switch. It uses an independent boat-shaped power switch which is convenient to control the power switch as well as to protect the normal operation of the internal equipment.

• Bluetooth APP Control.It can not only be used as an ordinary Bluetooth receiver, but also use the special Bluetooth APP SiniLink to achieve the play state switching and sound quality playback. In particular, it can support the modification of the Bluetooth name and set the Bluetooth pairing password which greatly improving the safety of the use of the product.

• Bluetooth/AUX/U-disk Audio. It can not receive music from Bluetooth, but also can get from AUX and U-disk to adapt to different applications. It can play WAV, FLAC, APE, MP3 music file. Support ON/OFF voice prompt, adjust volume, switch next/prev, switch play mode and so on.

• Protection Function. It has multiple protection mechanisms to ensure its safe operation with Over-voltage protection, under-voltage protection, short-circuit protection, overheating protection, clipping protection.

Parameters:

• Model:XY-C160H
• Work Voltage:DC 12V-38V(15V or more recommended)
• Work Current:>5A
• Unique function:Sinilink APP control
• Controller IC: TDA7498E
• Channel:2.0 channel stereo output
• Bluetooth:BLE 5.0
• Audio input type:Bluetooth/AUX/U-disk/USB sound card
• Audio output type:Left/Right
• Adjust volume:360° Potentiometer adjustment
• Frequency range:20Hz-20KHz
• Communication distance:15meter(Max)
• Over temperature protection:Yes
• Short circuit protection:Yes
• Over voltage protection:Yes
• Under voltage protection:Yes
• Clipping protection:Yes
• Work Temperature:-20℃~85℃
• Work Humidity:5%~95%RH
• Module Size(Installed):110 x 82 x 25mm

Output power:

• Output power 35W*2 at 24V 8ohm
• Output power 70W*2 at 24V 4ohm
• Output power 80W*2 at 36V 8ohm
• Output power 160W*2 at 36V 4ohm

Use steps:

• Choose the right speakers and connect as shown in wiring diagram.
• Connect to right power supply from DC-005 power socket.LED indicator will flashing and it means that module enters pairing mode.And then speak prompt voice and it means that module is waiting for pairing.
• Turn ON Bluetooth on phone.
• Select Bluetooth device ‘XinYi’ or modified name in your Bluetooth device listing.
• LED indicator will keep ON and it means that module is successfully connected and is waiting for playing.
• Module will playing music after select music on phone.LED indicator will keep slowly blinking.
• Adjust potentiometer to change volume as you need.
• Open APP Sinilink and register an account if need control by APP.
• Click the dot with Bluetooth logo(in the middle).
• Select ‘Bluetooth devices’ and then Search Bluetooth.
• Select devices ‘Sinilink-APP’ to connect module.
• User can adjust volume, select next or previous, play/pause, select EQ, set name and password.
• Module will speak prompt voice if disconnected.

Note:

• The power amplifier board should be as far away as possible from the WIFI signal (router) avoid signal interference.
• It is power supply voltage DC 12V-38V with more than 5A current. Module will be damaged if input voltage is more than 38V.
• It is recommended to use a working power supply of more than 15V.
• Please don’t use too long wires to avoid signal interference.
• There can be enough power output only when the audio input is sufficient and the power supply voltage/current input is sufficient.
• The higher the power supply voltage, the greater the output power.
• The smaller the impedance of the speaker, the greater the output power. It is recommended to use 4ohm speaker.
• Please read use manual and description before use.

Package:

• 1pcs XY-C160H 160W x2 2.0 Bluetooth 5.0 Amplifier Module
• 2pcs Aluminium Alloy Shell
• 1pcs 6mm knob cap
• 1pcs ‘+’ Screwdriver
• 4pcs M2x18mm Copper column
• 4pcs M2x4+3mm Copper column
• 8pcs M2x3mm screw