About this item:

• APP CONTROL: Are you also worried about whether your heating equipment is working properly when you are not at home? Comes with a WiFi module, just connect to the WiFi network once and download the APP, you can monitor the temperature of the device you want to control in real time and set the value or turn it on or off at any time

• HIGH TEMPERATURE CONTROLLER: The temperature control range: -99°C~+999°C, you can freely control it on the APP, choose the temperature unit (°C or °F) , or choose the heating or cooling mode. Of course, it also supports setting directly through the buttons

• MULTIFUNCTIONAL: In addition to the freedom to choose the working mode (heating or cooling), it also has the function of delay start, temperature correction, high and low temperature alarm, emergency stop and sleep. If you operate on the APP, you can also see the past operation records

• K-TYPE THERMOCOUPLE: Comes with 1m waterproof temperature sensing probe, high sensitivity, good stability and high measurement accuracy

• RELAY SWITCH OUTPUT: The output of the thermostat is one-channel relay switch with a current of 10A, which can meet various high-power loads, working voltage: DC 6-30V, it can be widely used in smart home and industrial equipment, suitable for household appliances, office machines, greenhouses, etc.

How To Connect To The APP

Module Pairing

• Download and register APP Sinilink. Users can get APP by scanning the QR code inside the package. Connect to DC6V-30V power supply at input terminal. (Note: Please don’t connect to load before pairing and test.)
• Make sure the module and phone are connected to the same WIFI. Note: It can work with 2.4G WIFI instead of 5G.
• Pressing the button on WIFI module 5 seconds and it will enter into pairing mode.

APP Pairing

• Click + on the right and select "Touch".
• The WIFI name is automatically displayed and then enter the WIFI password which phone is connected. And then the next step.
• Set device name and classification. And then the next step.
• Waiting configuration about 1~3minute.
• If the pairing fails, please try it several times (remove power supply).
• Reset the module device name after connecting successfully.
• Finished. You can test and set module parameters.

Specifications and Parameters

• Product Name: Digital High Temperature Controller
• Working Voltage: DC 6-30V
• Maximum Current: 10A
• Temperature Control Range: -99°C~+999°C
• Temperature Measurement Accuracy: ±2°C
• Output Type: One-Channel Relay Switch
• Probe Type: K-Type Thermocouple
• APP real-time monitoring and setting
• Temperature correction
• Emergency stop
• Clear LCD display