This kit has all you need to build a beautiful LED Cube 4x4x4 1 Color. Attention, this is a kit, so you will need to do the assembling and soldering of the parts by yourself.

I started my journey in Arduino's world by making an LED Cube. And fell in love with it. Then I try to design a PCB to make it more beautiful so I can put it on my desk and show it to everyone. Here I share the PCB I designed for the cube, complete with all the components needed as a kit. It also include a jig that I used for placing the LEDs while soldering. For the assembling process, you can watch my video or check my website.

In this kit :

• Cube 1 Colour PCB = 1pcs
• 1 Jig for placing the LEDs while soldering
• IC ATMega328P-PU = 1pcs (already have the program inside)
• IC Socket 28pin = 1pcs
• Crystal 16Mhz = 1pcs
• Capacitor 22pF = 2pcs
• Capacitor 0.1uF = 3pcs
• Capacitor El 10uF = 2pcs
• Resistor 10k = 1pcs
• Resistor 220R = 4pcs
• Pin Header Female 1x6 = 1pcs
• Pin Header Male 1x3 Straight = 1pcs
• Jumper Cap = 1pcs
• Power Regulator 5V (7805) = 1pcs
• Diode 1n4007 = 1pcs
• Tactile Button 6x6x5 Right Angle = 1pcs
• Mini Slide Switch = 1pcs
• Socket DC PCB Mount = 1pcs
• Mini USB Jack = 1pcs
• LED 5mm Diffused Blue Colour = 70pcs (you'll only need 64, you will have 6 for spares)
• USB Male to DC 5.5mm Cable = 1pcs
• Bolt and Nuts M3 x 15mm = 4sets (for the cube's leg)
• Wires for the LED wireframe and to connect the LEDs, length are about 8.5cm, total 50pcs (you will have enough spares)