This is an RGB LED Cube in a kit (assembly required). This is based on Asher Glick's charliecube design. I design the boards to make it easier for everyone to make one, and to make it more beautiful. I also include the photos of assembled Cube for your reference.

I also made some modifications to the code. The code I use for this kit can be found at : https://github.com/paulustanuri/PT018_RGB_LED_Cube_V3.1 The ATMega328P-PU at the kit is already programmed with the code, but you can make your own modification if you want to. I also have the assembly video on youtube as a guide. The video language is Indonesian but has captions in English available. You can also check the wiki page for more information and to see how the schematics are. https://wiki.indopalta.net/en/index.php/LED_Cube_RGB_4x4x4 All the jigs needed to help assemble the cube are also included inside the kit.

Here is the list of components included in the kit:

• RGB LED 5mm Common Cathode : 68pcs (you'll only need 64pcs)
• Zinc wires @8,5cm : 68pcs (you'll only need 64pcs)
• IC ATMega328P-PU : 1pcs
• IC Socket 28pin : 1pcs
• Crystal 16Mhz : 1pcs
• Ceramic Capacitor 22pF : 2pcs
• Ceramic Capacitor 0.1uF : 6pcs
• Electrolytic Capacitor 10uF : 2pcs
• Resistor 10k : 1pcs
• Resistor 1K : 1pcs
• Pin Header Female 1x6 Right Angle : 1pcs
• Pin Header Female 1x8 Straight : 2pcs
• Pin Header Male 1x8 Straight : 2pcs
• Diode 1n4001 : 1pcs
• Tactile Button 6x6x5 Right Angle : 2pcs
• Mini Slide Switch : 1pcs
• Socket DC PCB Mount : 1pcs
• M3x6 Black Pan Padded Screw : 4pcs
• M3x5 Male-Female Nylon Spacer : 4pcs
• M3x10 Female-Female Nylon Spacer : 4pcs
• M3x7x1 Nylon Flat Washer : 4pcs
• RGB444 Base Board : 1pcs
• RGB444 MinSys Board : 1pcs
• USB to DC jack cable : 1pcs