An Arduino shield for accessing Gameboy GB/GBC cartridges. Use the GBCartRead program to read the ROM and read/write to the RAM.

This kit requires you to have your own parts and needs to be assembled. You receive the bare PCB (69mm x 53mm) with 2x 10K resistors and 2x LEDs 0805 pre-soldered.

See more details at insideGadgets

Parts Required

• 74HC595D SMD SO16 (2)
• GBA Game Cart Slot for NDS Lite SMD (1) – http://dx.com/p/repair-parts-replacement-gba-game-cart-slot-for-nds-lite-37787
• Arduino (5V version)
• 8 pin Female headers (2) – (or Arduino 8 Pin .100″ Stackable Header)
• 6 pin Female headers (2) – (or Arduino 6 Pin .100″ Stackable Header)
• Red LED SMD 0805 (2) – comes pre-soldered to PCB
• 10K Resistor SMD 0805 (2) – comes pre-soldered to PCB

Build Instructions

• The GBA Game Cart Slot has two small little plastic bits on the bottom which you will need to shave off and you will need to snip off the ends of the GBA Game Cart Slot otherwise when you try to insert the Gameboy cartridges they won’t fit (see Cart_Slot_Cuts_Needed.jpg picture)
• Solder the GBA Game Cart Slot, the 2x 74HC595D and the headers

Delivery

To reduce shipping costs the kit is sent via the Airmail letter service for $3 and the estimated delivery time is 3 – 10 working days.