Perfect for any DIY IOT project, qBoxMini Enclosure Kit series is the part of the newest HW platform designed to help hobbiests, makers and all DIYers to build environmental ready IOT solutions.

qBoxMini DIY IOT Enclosure Kit features:

• Flanged IP65 waterproof enclosure: Sealed, made of high-quality ABS material suitable for indoor and outdoor DIY IoT projects;

• Incorporated M8 cable glands: Two cable inputs securely allow bringing the power in and connecting sensors and actuators;

• Perfect fit PCB: High-quality double-sided PCB with 0.1" hole spacing for DIP integrated circuits, modules, and main controller board;

• Fixed placement for controller board: Well designed PCB allows to carry a variety of MCU boards like Adafruit Feather Compatible, Arduino MKR Compatible, NodeMCU, etc;

• Built in SMA connectors : Two SMA Straight Female to IPEX（U.FL） adapter cables give external antennas connections to your wireless board;

• Dedicated Connectors positions: Terminal block, Grove and 0.1" DIP  power and interface connectors could be easily soldered onto the PCB.

What's it:

Each qBoxMini Enclosure Kit consists of durable waterproof IP65 enclosure with installed M8 glands, double sided PCB with dedicated placements for IOT controller and connectors and two integrated SMA to u.FL adapter cables.

External DC voltage from power adapter or solar system could be brought by cable through the one gland inner and another gland gives opportunity to connect external sensors or actuators.

Up to two GSM / LTE / WiFi / LoRa / etc. external antennas could be connected to wireless board u.FL PCB connector via SMA to IPEX (u.FL) adapter cables glued into enclosure wall.

Two M3 self tapping screws securely attach the PCB to the enclosure. Same time board could be easily removed.

Enclosure has enough room to keep with or without stacking header one IOT controller board like Adafruit Feather Compatible (AFC) or Arduino MKR Compatible (AMC) or another IOT board, power supply (DC/DC), OLED display and sensor modules using plain grid proto holes.

Up to two plugable 3,5mm terminal blocks, one Grove and several DIP 0.1" I2C interface connectors could be populated. Two separate power traces for VDD and GND along short PCB sides allow bring the power to sensor boards.

Transparent lid lets see internal parts, electronics, LEDs and even display and is able to hold LiPol battery to be applied to the internal surface.

Using qBoxMini Enclosure Kit the variety of IOT DIY and POC projects could be done, like LoRa-based soil moisture monitoring project, home WiFi garage door opener, NB-IOT bee hive monitoring system, GSM GPS asset tracking solution, etc.

Specifications:

• Housing Material: ABS
• Water and Dust Proof: IP65
• Enclosure Outer Size: 4.63"x2.28"x1.34" (LWH)
• Enclosure Inner Size: 3.0"x2.0"x1.1" (LWH)
• Gland model: M8
• Cables with diameters: 0.08-0.19"
• PCB size : 2.93"x2.0"
• SMA u.FL adapter cables : 2
• SMA u.FL adapter cable length : 3.15"
• PCB has next dedicated placements:
• a) MCU board (Adafruit Feather Compatible or Arduino MKR Compatible);
• b) two 3,5 mm terminal blocks;
• c) one Seeed Grove I2C connector (VDD, GND, SCL, SDA).
• d) 4 pins DIP 0,1" / 2,54 mm I2C interface connector (VDD, GND, SCL, SDA) : to be used for I2C OLED display module;
• e) 5 pins DIP 0,1" / 2,54 mm I2C interface connector (VDD, GND, SCL, SDA, IO) : to be used for I2C sensor modules connection;

What's included:

• IP65 waterproof enclosure with two M8 glands installed and two SMA u.FL adapter cables glued;

• High-quality prototyping double-sided PCB mounted with two M3 self-tapping screws (No connectors included);

• Antistatic bag and shipping box.