IMPORTANT: DO NOT order this product if you are not located in USA, Canada or Mexico!!!

Compact, reliable and versatile LTE CAT4 (4G) and HSPDA UMTS (3G) data modem North American version (USA, Canada and Mexico) + GNSS (GPS + GLONASS + GALILEO*) for RaspberryPI, BeagleBone Black, Arduino and other 3-5V micro-controllers.

u-GSM modems have clever designed embedded Raspberry PI GPIO interface (HAT like) and embedded Raspberry PI GPIO interface (CAPE like) for easy and convenient assembly within RPI GPIO / BBB GPIO interfaces. The modem can be directly powered from RPI/BBB GPIO 5V pin when it's configured in LiPO mode. The u-GSM PCB may be easy trimmed by user in order to fit RPI or ITBPMM form factor.

u-GSM with EG95NA, part of itbrainpower u-GSM family (20 part numbers) - quality w/o compromises, designed and manufactured in EU.

For full capabilities description you should read bellow the "Specifications" section and attached PDF files.

Overview:

• LTE CAT4 (4G) and HSPDA UMTS (3G) modem North America version + GNSS
• USB (miniB and USB soldering pads), 3-5V auto UART and contol / status GPIOs
• RaspberryPI (all), BeagleBone Black, Arduino (all), xyz-mIoT nodes and any 3-5V micro-controller compatible
• with LiPO battery can be powered directly from RPI/BeagleBone 5V pins! w/o LiPO can be powered from ~4V/>2000mA power supply.
• Debian USB drivers support, pre-configured Linux packages for RaspberryPI and other resources available

Modem side specifications

• Modem: Quectel EG95NA - high speed LTE CAT4 modem
• Radio protocols: LTE CAT4 (4G) + 3G
• Radio coverage: North America
• Bands: FDD LTE - B2/B4/B5/B12/B13, WCDMA - B2/B4/B5;
• Speeds: LTE CAT4 - Max. 150Mbps (DL) / Max. 50Mbps (UL); DC-HSDPA Max. 42Mbps (DL)/ HSUPA Max. 5.76Mbps (UL), HSUPA/HSPDA - Max 5.76Mbps / Max 7.2Mbps, WCDMA: Max. 384Kbps (DL) / Max. 384Kbps (UL);

• GNSS support: YES - Galileo, GPS, GLONASS, BeiDou/Compass, QZSS

• SIM support: 1 x NANO SIM/USIM socket.

• External SIM: supported as default - 5 pin 1.27mm interface.

• Modem power management: - power isolation controlled external GPIO

• GSM radio hardware connector – u.FL (SKU: ITBP-3005) / SMA (SKU: ITBP-3006)
• GNSS radio hardware connector – u.FL
• USB soldering pads for modem – yes

Interfacing and adapter side specifications:

• embedded Raspberry PI GPIO interface (2x10pins) - compatible with all RPIs with type B interface, including RaspberryPI 4;
• embedded BeagleBone Black GPIO P9 interface (2x10pins);
• ITBPMM interface (10pins) for wiring to Arduino and any other 3-5V micro-controller;
• USB port (Widows & Linux drivers support);
• USB mini B connector and USB soldering pads;
• Embedded LiPO / LiION / super-capacitor charger;
• super-capacitor soldering pads;
• Reset SWITCH
• POWER, STATUS and LiPO charger LEDs

What's included u-GSM w. EG95NA IoT modem x 1pcs. - NO Raspberry PI, BeagleBone, Arduino or accessories included

Dimensions:

• BeagleBone partion: 45x41mm
• RaspberryPI partition: 45x34mm
• main partition: 45x27mm

Online resources

• downloads
• documentation
• projects and how to

u-GSM w. EG95NA commercial variants:

• uFL - PN: UGSM219-EG95NA#UFL / SKU: ITBP-3005
• SMA - PN: UGSM219-EG95NA#SMA / SKU: ITBP-3006

IMPORTANT notice for SMA version - due to mechanical restrictions, embedded RPI and BeagleBone black modem interfaces can NOT be used! Still, interfacing with RaspberryPI and Beaglebone Black it's supported via wires.