Compatible with Commodore PET, VIC-20, C64 and C128.

A pre-programmed WiFi MODEM for your User Port. The cases printed well enough; you can clean them up further with surface finishing and paint, if you want. Label and instructions are available below.

Note: The modem has to be set to a higher baudrate before the terminal program can use that speed. The command is: AT$SB=N (where N=300,1200,2400,4800,9600,19200,38400,57600,115200)

::: INSTRUCTIONS :::

1. With your C64 powered OFF, Plug the Strikelink into the C64 User Port, LEDs/button -side UP.

2. Turn on computer, and load the latest version of CCGMS.

3. Press F7 to enter the program settings menu, select UP9600 / EZ232 under modem type, and change the baud rate to 9600 baud.

4. Save Phonebook and Config.

5. Press Return to enter Terminal Mode.

6. Press Return. Your Strikelink should say hello to you!

7. Press F8 to enter Anscii Mode (Anscii is a combination of Ascii and Ansi. CCGMS will interpret Ansi colors in Ascii mode). Anscii mode helps the modem properly interpret your WiFi router SSID and Password.

8. Type at$ssid=yourssidgoeshere (Then press Return)

9. Type at$pass=yourpasswordgoeshere (Then press Return)

10. Type atc1 to Connect (atc1 connects to your WiFi, atc0 disconnects)

11. Type at&w to write your settings to the Strikelink WiFi. These will be permanently saved, so in the future, you can load CCGMS 2019, press return, and you should automatically be ready to call BBSes. If your Strikelink ever fails to connect to your router / WiFi access point, just type atc1 to try connecting again.

12. Press F8 to return to Graphics mode, and use the Autodialer in CCGMS 2019 to start calling C64 BBS Systems. You can save your User ID and Password for BBSes in CCGMS 2019 and send them to the BBS you call by pressing F6 and F8, respectively. It makes logging in much easier!

https://8bithardware.wixsite.com/website/post/c64-wifi-modem-user-port-by-sven-petersen-commodore-wifi-modem https://github.com/svenpetersen1965/C64-WiFi-Modem-User-Port https://1200baud.wordpress.com/category/striketerm/ https://github.com/bozimmerman/Zimodem

Case Label is available here: https://github.com/svenpetersen1965/C64-WiFi-Modem-User-Port/tree/master/Case/for%20PCB%20Rev.%202/label