Description

The Smart Lights X1 is an electronic board based on the ESP32 with the target of controlling any light source in a range from 6-24VDC. It can read an input channel so you can also program the response of the light depending on the physical input form, for example, a pushbutton.

For knowing more about its features, check out the online documentation.

Features

• ESP32-S module: since it is based on the extended ESP32 microcontroller you can upload the ESPHome firmware and connect it with your Home Assistant setup or simply upload your own Arduino codes.

• Simplicity matters: Do you want to control the led light under your desk? Or maybe create a nightstand lamp that emulates the sunrise? Keep your electronics simple and use the ready-to-go Smart Lights X1.

• Open-source: if you have any questions or suggestions about the design, just check out all the documentation and design files on my Github

What you buy

Select between the two assembly options the option that better fits you:

• Assembled: You will get a fully assembled Smart-Lights X1 board, ready to be powered and configured.

• Kit: You will get a Smart-Lights X1 board with all the SMD components already soldered and the THT (through hole) components to be soldered by you. You can check out what is placed where using the online BOM

• PCB: You will get a freshly made PCB (LeadFree HASL) that you can assemble on your own. The SMD/THT components are not included, but you can check them out on the online BOM.

In both cases, the ESPHome firmware is already uploaded and tested, you only have to follow the instructions on the documentation for connecting to your WiFi network to be recognized by your Home Assistant setup.