This adapter transforms your Logitech shifter into a seamless plug & play USB device, and interestingly, it works independently of the Logitech steering wheel. The device is self-sufficient, needing no third-party drivers or software to configure as it's all handled on the device itself.

Features

• OLED screen with gear readout
• In device calibration
• In device button testing
• No need to download any software to calibrate device
• Auto screen power off after 5 minutes of inactivity

Supports: Logitech G25, G27, G29 and G920 shifters

Micro USB cable not included

Videos:

• Demo: https://youtu.be/u8ARw9zQVJ8
• Calibration: https://youtu.be/Mp4bilR17y4

(Note: these videos are for the same device, but in another case)

Instructions:

Navigation

Simply press the button on the bottom right to navigate through the different screens on the device.

Calibration screen

Press the button twice in order to get into the calibration screen. Once on the screen, follow the on screen instructions. Press and hold the button to enter calibration mode. Put your shifter into 1st gear and then press the button. Once you have pressed the button, the device will tell you to wiggle the shifter in first gear to calibrate it. Once done press the button again. Next move it into 2nd gear and repeat the process and press the button . Once you have done that, move to the 5th gear and press the button. Again follow the on screen instructions and wiggle the shifter in 5th to calibrate it pressing the button when done. And finally repeat the previous step but in 6th gear. Pressing the button this time will greet you with the calibration complete screen. Simply press the button one more time to exit calibration.

Button test screen

Press the button once to get into the button test screen. Once on the screen you are able to press any button or combination of buttons on your G27 shifter to test that they are reading correctly to help diagnose any issues you may be having with your old shifter.