Introduction

nanoCH32V203 is a development board made by MuseLab based on CH32V203C8T6 of QinHeng. It features dual TYPE-C USB interfaces, LCD interface and SD card slot on board, and can be programmed through the USB port which is convenient for prototype verification and development.

Features

● Dual USB interface, USB1 supports Device, USB2 supports Host/Device

● Can be downloaded directly via USB without additional downloader

● Onboard 8MHz and 32.768K crystal oscillator

● FPC-12P cable connector, which can support common LCD (such as ili9341, st7789, etc.)

● SD card slot, which supports SD card reading and writing (SPI protocol)

Chip Resources

Diagram

Documentation

● https://github.com/wuxx/nanoCH32V203

Shipping List

● Kit 1: nanoCH32V203 Development Board x 1 + 20 Pin Header x 2

● Kit 2: nanoCH32V203 Development Board x 1 + 20 Pin Header x 2 + 1 Meter TYPE-C Cable x 1

● Kit 3: nanoCH32V203 Development Board x 1 + 20 Pin Header x 2 + 1.54 Inch Screen ( 240*240 ) x 1

● Kit 4: nanoCH32V203 Development Board x 1 + 20 Pin Header x 2 + 1.54 Inch Screen ( 240*240 ) x 1 + 1 Meter TYPE-C Cable x 1

● Kit 5: nanoCH32V203 Development Board x 1 + 20 Pin Header x 2 + WCH-LinkE Debugger x 1

● Kit 6: nanoCH32V203 Development Board x 1 + 20 Pin Header x 2 + WCH-LinkE Debugger x 1 + 1 Meter TYPE-C Cable x 1

● Kit 7: nanoCH32V203 Development Board x 1 + 20 Pin Header x 2 + WCH-LinkE Debugger x 1 + 1.54 Inch Screen ( 240*240 ) x 1

● Kit 8: nanoCH32V203 Development Board x 1 + 20 Pin Header x 2 + WCH-LinkE Debugger x 1 + 1.54 Inch Screen ( 240*240 ) x 1 + 1 Meter TYPE-C Cable x 1