Note

● ESP32-S3-WROOM-1-N8: 8MB Flash

● ESP32-S3-WROOM-1-N8R2: 8MB Flash + 2MB PSRAM

● ESP32-S3-WROOM-1-N8R8: 8MB Flash + 8MB PSRAM

The ESP32-S3 ExtBoard is equipped with a digital microphone, camera interface and SD card holder, which can be used for voice recognition and face recognition verification experiments. At the same time, it leads to 2 standard PMOD connectors, which can be extended to connect to the LCD or other peripheral sensors, etc. It is recommended to simultaneously purchase the core board and extboard for development and prototype verification.

Introduction

nanoESP32-S3 is a ESP32-S3 development board designed and made by Muse Lab, based on ESP32-S3-WROOM-1-N8 module manufactured by Espressif, with on-board TYPE-C and RGB LED. The on-board programmer ESPLink supports usb-to-serial (compatible with traditional use), drag-and-drop program and JTAG debug, which makes it convenient for developers to develop and test.

Features

● On-board ESPLink programmer, supporting usb-to-serial (compatible with traditional use), drag-and-drop program and JTAG debug

● On-board downloading key and reset key

● On-board TYPE-C and RGB LED

● Small Size: 6.1cm*2.8cm

Specification

nanoESP32-S3 use the ESP32-S3-WROOM-1-N8 module manufactured by Espressif, its specification is as below,

Diagram

Documentation

● nanoESP32-S3

https://github.com/wuxx/nanoESP32-S3

● esp-idf

https://github.com/espressif/esp-idf

● esp32-S3 get-started

https://docs.espressif.com/projects/esp-idf/en/latest/esp32s3/get-started/

● esp32-S3

https://www.espressif.com/zh-hans/products/socs/esp32-s3

Shipping List

● Kit 1-3: nanoESP32-S3 Development Board x 1 + 21 Pin Header x 2

● Kit 4-6: nanoESP32-S3 Development Board x 1 + 21 Pin Header x 2 + ExtBoard x 1

● Kit 7-9: nanoESP32-S3 Development Board x 1 + 21 Pin Header x 2 + 1 Meter TYPE-C Cable x 1

● Kit 10-12: nanoESP32-S3 Development Board x 1 + 21 Pin Header x 2 + ExtBoard x 1 + 1 Meter TYPE-C Cable x 1