What is it?

The EncoderPad RP2040 is a Video Editing Macropad with a 60mm Encoder Wheel that's designed for use for CNC machines. This encoder is made of metal and feels like it will last forever. The EncoderPad uses 9 mechanical switches (Cherry MX type). The PCB has a soldered-on RP2040, a small speaker and uses hot swap sockets for the switches.

Why did you make it?

As I have been editing more videos for the BlueMicro Youtube Channel, I have been looking for a useful macropad that includes a jog wheel that can be re-programmed for various purposes.

How do I program it?

It's programmed in CircuitPython. As such, you don't need any special tooling to edit the keymaps. Connect the controller, it will show-up as a mass storage device. Open up the keymap files, edit and save them. The macropad will automatically reboot with the new keymap! It's that simple!

The kit includes the following components:

• Main PCB
• Top, Bottom PCB Plates
• CNC Rotary Encoder (It's a pulse generator)
• 4 Pin Connector
• 4 Dupont wires
• 5 brass standoffs
• 10 m2 screws
• 4 rubber bump-ons

Optional add-ons

• 9 Gateron Mechanical Switches
• 9 Keycaps

How different is it from the wireless model?

• Designed to be the simplest to assemble as a DIY kit.
• Operates wired only (USB)
• No battery
• Same Speaker/buzzer
• RGB LEDs

Notes:

• Standard order does not come with switches or keycaps. You will need to obtain these yourself.
• Switches must be installed with the PCB on a flat surface, so as to not damage the hot swap sockets. Pushing the switches in while holding the PCB in midair may cause the hot swap sockets to come off.
• Find the shortcuts of your favorite software at defkey.