Flipper Zero ESP32 Wemos D1 Mini Adapter

Name: Flipper Zero ESP32 Wemos D1 Mini Adapter
SKU: 29235
Price: 18.00 USD
Availability: OutOfStock

A Flipper Zero adapter for the ESP32 Wemos D1 Mini

Designed by JustCallMeKoko in United States of America

Flipper Zero ESP32 Wemos D1 Mini Adapter 1

Flipper Zero ESP32 Wemos D1 Mini Adapter 2

Flipper Zero ESP32 Wemos D1 Mini Adapter 3

Flipper Zero ESP32 Wemos D1 Mini Adapter 4

2023-02-01T21:11:26.887Z-IMG_7003 - Copy.jpg

2023-02-01T21:11:26.887Z-IMG_7004 - Copy.jpg

2023-02-01T21:11:26.887Z-IMG_7005 - Copy.jpg

2023-02-01T21:11:26.887Z-IMG_7006 - Copy.jpg

$18.00

Out of Stock

Sold out since Apr 23, 2023

A Flipper Zero adapter for the ESP32 Wemos D1 Mini

ESP32 Wemos D1 Mini Adapter This adapter board is compatible with the Flipper Zero peripheral header. It is meant to serve as an alternative to the official Flipper Zero WiFi Dev Board as a solution …

ESP32 Wemos D1 Mini Adapter

This adapter board is compatible with the Flipper Zero peripheral header. It is meant to serve as an alternative to the official Flipper Zero WiFi Dev Board as a solution for adding WiFi capabilities to the main Flipper Zero unit.
This unit does not include the required ESP32 Wemos D1 Mini development board. Additionally, this board only accommodates the version of the ESP32 Wemos D1 Mini where the TX pin is labeled as RX and the RX pin is labeled as TX as these are more available (unfortunately). Please be sure to check the pinout/schematic before purchasing your development board to ensure compatibility with this adapter.

An Alternative to the official Flipper Zero WiFi Dev Board

The official Flipper Zero WiFi Dev Board serves as a Flipper Zero peripheral that adds WiFi capabilities to the main unit. Unfortunately, these development boards are rarely in stock. This adapter board allows used to install the readily available ESP32 Wemos D1 Mini on the adapter so it may connected to the Flipper Zero itself. This simplifies the hardware assembly process for projects involving the ESP32 Marauder firmware.

Usage

The adapter board is meant to be used as a peripheral device for the Flipper Zero. With the adapter board plugged into the Flipper Zero expansion header and an ESP32 Wemos D1 Mini connected to the available female header, you can either use the USB UART Bridge of the Flipper Zero with a mobile device or PC to access the Marauder CLI or you can use the WiFi Marauder companion app created by cococode. Firmware installation and update instructions for the ESP32 Wemos D1 Mini can be found on the ESP32 Marauder Github Wiki.

Features

Flipper Zero compatible Header pins
Fits ESP32 Wemos D1 Mini (See conditions above in bold)
WS2812-2020 RGB LED
Micro SD Card Slot
UART Activity LEDs

What's Included

1x ESP32 Wemos D1 Mini Adapter Board

Resources

If you're interested in learning more or you have any questions, consider checking out the following links. You'll find helpful YouTube videos, additional project content, and other like-minded folks.