Flex (FPC) 1mm cable passthrough breakout

Name: Flex (FPC) 1mm cable passthrough breakout
SKU: 4330
Price: 10.00 USD
Availability: OutOfStock

A timesaver for when you have to sniff display signals on a 1mm pitch flex cable

Designed by Kuzyatech in United States of America

Flex (FPC) 1mm cable passthrough breakout 1

Flex (FPC) 1mm cable passthrough breakout 2

Flex (FPC) 1mm cable passthrough breakout 3

Flex (FPC) 1mm cable passthrough breakout 4

Flex (FPC) 1mm cable passthrough breakout 5

2015-02-24T01:09:24.556Z-P2230568-001.JPG

2015-02-08T18:06:49.765Z-201502_FPC_1sch.png

2015-02-24T01:09:24.556Z-P2230569-001.JPG

$10.00

Out of Stock

Sold out since Jul 08, 2018

A timesaver for when you have to sniff display signals on a 1mm pitch flex cable

A pass-through breakout board for 1mm connectors up to 30 pins. Each signal is brought out to one of three 2x5 0.1" spacing headers. Typical use is to debug or reverse-engineer display interfaces, b…

A pass-through breakout board for 1mm connectors up to 30 pins.

Each signal is brought out to one of three 2x5 0.1" spacing headers. Typical use is to debug or reverse-engineer display interfaces, but of course it could also be used to join two flex cables. Board size is 41x38mm. This board was born after a particularly painful troubleshooting session on a poorly documented display. By hacking something like this together, it became possible to sniff traffic to the controller and figure out what did the vendor forget to include in the datasheet! Made in the USA.
Note: only bare board is included. Populated versions available by request or as an option. If you need a different pitch- let me know

No country selected, please select your country to see shipping options.