With a heavy heart, I have decided to take an indefinite break from distributing these. Other sellers are listed on www.piscsi.com, along with all of the necessary production files. Thank you for your support over the past couple years.

What is it?

This Raspberry Pi controller board is intended to provide a hardware solution for controlling your Raspberry Pi based projects. It provides a 0.6" OLED screen with a rotary encoder and two pushbuttons. You can design your own menu-based interface for your project using Python or your favorite programming language.

For PiSCSI users, an existing software package allows you to quickly set up this OLED board and control your PiSCSI configuration through an intuitive menu interface. No coding is required for the PiSCSI use case!

Additionally, there are pins for connecting this control board on top of the version 2.x PiSCSI boards using the OLED display connector and a spare GPIO.

Note: Newer PiSCSI boards have 6 pins on the J4 "Oled" connector. These will mate up with the 6 pin connector of the control board. Older PiSCSI boards only have 5 pins on J4. These will also need to use "GPIO9" from connector J5.

Please see the schematics for additional information.

Though this was originally designed for the PiSCSI , it will work with any Raspberry Pi project. You'll just need to create your own software.

What's Included?

PCB Only

• PCB with surface mount components pre-installed

Kit

• PCB with surface mount components pre-installed
• 0.6" Black & White OLED display
• Rotary Encoder
• Qty 2 - pushbutton switches
• 40 pin female connector for Raspberry Pi GPIO
• 80 pin breakaway pin header
• 4 pin header for installing OLED

What's NOT included?

• Mechanical standoffs and screws for mounting the board
• Raspberry Pi
• PiSCSI (option)

Why did you make it?

This control board provides the hardware necessary to create a menu interface to your Raspberry Pi based project.

What makes it special?

It uses minimal GPIO pins (only one!) and the I2C bus. This frees up most of your GPIO pins for other uses.

Standard Disclaimer for Open Source products

THIS SOFTWARE AND HARDWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.