RGB 8x Slider Mixer Fader for MIDI

Name: RGB 8x Slider Mixer Fader for MIDI
SKU: 13325
Price: 5.00 USD
Availability: OutOfStock

Board for 8x 60mm faders (B10KX2 style or PTA60 series) with corresponding RGB LED

Designed by Leaf Cutter Labs in United States of America

This seller is taking a break until June 21, 2021. Sign up below to get an email when they're back!

2018-06-29T20:36:44.836Z-IMG_20180627_192658503.jpg

2018-06-29T20:36:44.836Z-IMG_20180628_063145274.jpg

2018-06-29T20:36:44.836Z-IMG_20180628_063138337.jpg

2018-06-29T20:36:44.836Z-IMG_20180627_192405335.jpg

2018-06-29T20:36:44.836Z-IMG_20180627_192400598.jpg

2018-06-29T20:36:44.836Z-IMG_20180627_192501721.jpg

2018-06-29T20:36:44.836Z-IMG_20180628_063159900.jpg

$5.00

On A Break

New orders will be shipping after June 21st.

Board for 8x 60mm faders (B10KX2 style or PTA60 series) with corresponding RGB LED

What is it? Fader Slider Mixer bank for midi, light room control, kerbel space program, robot control, or any situation where a lot of linear potentiometer are needed. These are just fun to play arou…

What is it?

Fader Slider Mixer bank for midi, light room control, kerbel space program, robot control, or any situation where a lot of linear potentiometer are needed. These are just fun to play around with.

Why did you make it?

Wanted a small/simple midi fader bank. The LED can be programmed to whatever, I use them to show analog value by color changes.

Specifications?

8x 60mm fader (supports Behringer B10KX2 style or Bourns PTA60 series, may support other 60mm types but have not tested)
8x WS2812B spaced at 12.5mm
10cm x 10cm PCB with M2.5 holes in the corners
Various M2.5 holes around the perimeter for mounting
Supports Pro Micro - uses smaller diameter machine holes, the standard 2.54mm square headers will not fit
ICSP broken out - this uses the standard square headers