PC wireless control industrial device ON-OFF

Master side: PC to connect with a Wireless DTU LS-R324(USB interface), LSR324 also has RS232 port and RS485 port, you could use it to connect PLC ect.

Slave side: Industrial devices like motor, pump, valve, lights, meter to connect wireless I/O module LS-RDIO0808.

Indutroction:

Parameter:

Power output: 24V DC or 12V DC

RF power: 1W

Air baud rate: 1,200/2,400/4,800/9,600/19,200bps choose one

Interface baud rate: 1,200/2,400/4,800/9,600/19,200bps programmable

Frequency band: 433, 450, 470MHz or others

Interface: RS-232, RS-485 and USB

Communication mode: Half-duplex

Channel: 8(default), 16/32(customized)

Receive current: <45mA

Receive sensitivity: -123dBm @ 1,200bps); -118dBm @ 9,600bps)

Transmitting current: <500mA

RF line-of-sight range: 2km (BER=10-5@9600bps); 3km (BER=10-5 @ 1,200bps)

Size: 17511532mm (without antenna port)

Introduction

LS-RDIO0808 Modbus RTU is a 1W I/O module, 8 isolated digital inputs, 8 isolated relay outputs, 1 RS485 (wireless RS485 customizes). Wireless control 2km-3km. Use for pump control, water level monitoring, and motor, valve, light ON-OFF wireless control.

Parameter:

Input: 8 isolated digital active inputs (passive input customize)

Output: 8 isolated relay passive contact outputs, contact load 5A@220V AC, 5A@30V DC.

Protocol: Modbus RTU

Collocated with a wireless data module whose transmitting distance is about 2km-3km; the working frequency 433MHz (400-470MHz); RF power: 1W; Receiving sensitivity: -123dBm

Receiving current: <50mA;

transmitting current: 600mA

Power supply: DC 9V-36V

Dimension: 145mm90mm40mm