This packages includes

1 master module LS-RDIO0808 that has 8DI 8DO

4 slaves module LS-RDIO0202 each has 2DI 2DO.

Industrial design, wireless control distance 2km LOS

Introduction of LS-RDIO0808

LS-RDIO0808 Modbus RTU is a 1W I/O module, 8 isolated digital inputs, 8 isolated relay outputs, 1 RS485 (wireless RS485 customizes). Wireless control 2km-3km LOS. Use for pump control, water level monitoring, and motor, valve, light ON-OFF wireless control.

• Transparent I/O System, no programming required
• Not need internet, no third party cell, no monthly fees
• You have full control over your own carrier
• Real time status feedback from the remote site
• Fast installation and easy setup

Parameter of LS-RDIO0808:

• Input: 8 isolated digital active inputs (passive input customize)
• Output: 8 isolated relay passive contact outputs, contact load 5A@220V AC, 5A@30V DC.
• Protocol: Modbus RTU
• Collocated with a wireless data module whose transmitting distance is about 2km-3km; the working frequency 433MHz (400-470MHz); RF power: 1W; Receiving sensitivity: -123dBm
• Receiving current: <50mA; transmitting current: 600mA
• Power supply: DC 9V-36V (On sticker we only writes 24V DC, you could also use 12V DC)
• Dimension: 145mm90mm40mm
• Mounting: standard 3.5inch DIN rail mounting

Parameter of LS-RDIO0202

• Input: 2 isolated digital active inputs (passive input customize)
• Output: 2 isolated relay passive contact outputs, contact max load 5A@220V AC, 5A@30V DC.
• Communication: RS485 (wireless RS485customize)
• Protocol: Modbus RTU
• Collocated with a wireless data module whose transmitting distance is about 2km-3km. The working frequency 433MHz (400-470MHz); RF power: 1W; Receiving sensitivity: -123dBm
• Receiving current: <50mA; transmitting current: 600mA
• Power supply: DC 9V-36V
• Dimension: 115mm90mm40mm

Application:

• PLC wireless control pump/valve/motor
• stacker reclaimer wireless monitoring
• crane control
• conveyor wireless control
• wireless alarm system
• wireless light control