Wireless I/O module master 8DIDO, 2 slaves 4DIDO

Name: Wireless I/O module master 8DIDO, 2 slaves 4DIDO
SKU: 7702
Price: 285.00 USD
Availability: InStock

Remote I/O module, wireless PLC, master 8DI8DO, remote 2 salves 4DI4DO, 2km radio based wireless control

Designed by Lensen--Wireless Communication in China

Wireless I/O module master 8DIDO, 2 slaves 4DIDO 1

Wireless I/O module master 8DIDO, 2 slaves 4DIDO 2

Wireless I/O module master 8DIDO, 2 slaves 4DIDO 3

2016-07-14T10:27:48.840Z-LS-RDIO8--2 LS-RDIO2.jpg

Buy with confidence.

Our Tindie Guarantee protects your purchase from fraud. Learn More

Remote I/O module, wireless PLC, master 8DI8DO, remote 2 salves 4DI4DO, 2km radio based wireless control

#### What is it? This is a simple wireless control system Master side, there is 8DI 8DO Slave side, there are 2 slaves, each one 4DI 4DO The control distance around 1km Our products help to do wirele…

#### What is it?

This is a simple wireless control system

Master side, there is 8DI 8DO

Slave side, there are 2 slaves, each one 4DI 4DO

The control distance around 1km

Our products help to do wireless control

#### Why did we make it?

Sometimes, when we reform old system, it is hard to wire cable. That may need to trench groud, drill hole on wall, wire long long cable on buildings. Labor cost and construction cost are very high. So many customers are considered wireless solution.

In automation area, many users needs PLC to collect and control remote device ON-OFF, gather sensor data 4-20mA or 0-5V, report data to communicate with PC, HMI, DCS. our products just do this work. cut off the cable, do wireless control.

#### What makes it special?

I/O to I/O control: no need internet, no need program, easy to set up, in time transmission

Serial to I/O: support Modbus RTU protocol or PPI protocol

All are in-time monotoring, very short delay

Introduction

LS-RDIO0808 Modbus RTU is a 1W I/O module, 8 isolated digital inputs, 8 isolated relay outputs, 1 RS485 (wireless RS485 customizes). Wireless control 2km-3km. Use for pump control, water level monitoring, and motor, valve, light ON-OFF wireless control.

Parameter of LS-RDIO0808

Input: 8 isolated digital active inputs (passive input customize)
Output: 8 isolated relay passive contact outputs, contact load 5A@220V AC, 5A@30V DC.
Protocol: Modbus RTU
Collocated with a wireless data module whose transmitting distance is about 2km-3km; the working frequency 433MHz (400-470MHz); RF power: 1W; Receiving sensitivity: -123dBm
Receiving current: <50mA; transmitting current: 600mA
Power supply: DC 9V-36V (usually use 12V DC or 24V DC)
Dimension: 145mm90mm40mm

Parameter of LS-RDIO0404

Input: 4 isolated digital active inputs (passive input customize)
Output: 4 isolated relay passive contact outputs, contact load 5A@220V AC, 5A@30V DC.
Communication: RS485(wireless RS485customize)
Protocol: Modbus RTU
Collocated with a wireless data module whose transmitting distance is about 2km-3km; the working frequency 433MHz (400-470MHz); RF power: 1W; Receiving sensitivity: -123dBm
Receiving current: <50mA; transmitting current: 600mA
Power supply: DC 9V-36V (usually use 12V DC or 24V DC)
Dimension: 115mm90mm40mm

Application: