HB100 Doppler Speed Sensor - Arduino Compatible

Name: HB100 Doppler Speed Sensor - Arduino Compatible
SKU: 1122
Price: 25.00 USD
Availability: Discontinued
Rating: 4.17 (28 reviews)

(28 Reviews)

Speed and pseudo-distance sensor using the Doppler effect

Designed by limpkin in Switzerland

Product Retired

This product is no longer available for sale.

The seller may be offering an improved version or it may be hanging out on the beach, enjoying the retired life.

While you're here, check out these other awesome products for sale!

Visit Store

More From limpkin:

The Whistled - A Whistle Detection Device

limpkin

$18.00

Mooltipass Cards & Holders

limpkin

$3.00

More "Earth Day" Related Products

LiFePO4wered/Pi+

Silicognition LLC

$47.00

MPPT Solar Charger for intelligent devices

danjuliodesigns, LLC

$39.95

HB100 Doppler Speed Sensor - Arduino Compatible 1

HB100 Doppler Speed Sensor - Arduino Compatible 2

HB100 Doppler Speed Sensor - Arduino Compatible 3

HB100 Doppler Speed Sensor - Arduino Compatible 4

2015-03-05T13:01:44.230Z-P50305-152813.jpg

2015-03-05T13:01:44.230Z-P50305-152834.jpg

Speed and pseudo-distance sensor using the Doppler effect

This product has been discontinued, its replacement can be found here Overview The HB100 Doppler modules you can find on Tindie or eBay need some electronics to be operated. This listing is for an o…

Overview

The HB100 Doppler modules you can find on Tindie or eBay need some electronics to be operated. This listing is for an official HB100 module (from ST Electronics) with its backpack, which contains all the necessary components.
To make it work, you just need to apply 5V and you're good to go! You may find Arduino sample code on my webpage.
Please note that the assembly you'll receive may have a 90 degrees back connector as a straight one may damage the envelope it is shipped in. Shipping will be done from Switzerland or Shenzhen depending on current stock and customer location.

Input & Output signals

5V / 50mA input
Frequency output, proportional to the object's speed
Voltage output, proportional to the amount of reflected RF signal

Please have a look at the video below which shows what you should expect.
For advanced technical specifications, please have a look at my webpage.
Please also check that this Doppler sensor follows your country regulations.

Speed measurement capabilities

As you can see in the video below this Doppler sensor is made to measure walking speeds from tens of meters away.
It will however be able to measure much faster objects when they are close to the sensor. For more advanced details on what to expect you may read the dedicated paragraph on this webpage.
You may also be interested in my smaller, newer CDM324 doppler sensor module which can measure higher speeds.

Quantity	Price
1-14	$25.00
15-24	$23.00
25+	$21.00

Review Breakdown

Average Ratings

Product: (4.58)

Documentation: (4.04)

Shipping: (3.92)

Communication: (4.15)

Michael | Aug. 3, 2020

Ships from China

You say that you ship from Switzerland. So I payed for that. But I received the shipping information that my package will be received from China (Shenzhen). It usually takes much longer for packages to arrive from China. Strictly speaking, it would not be part of the sales contract. I need the sensor, so I'll have to wait. That is annoying. The shipping costs are therefore not conclusive and transparent for me. Especially since half of the order was almost the shipping costs.

Response from limpkin | Aug. 3, 2020

Hello!
We're very sorry you got that impression... in the HB100 product description is mentioned " Shipping will be done from Switzerland or Shenzhen depending on current stock and customer location."

Mohd | March 20, 2020

HQ Product, Fast Shipping, Useful Doc.

Hi limpkin,
first of all thank you for fast shipping, but i paid two shipping fee and get it in same box :)

I've question, in CODE you use "19" for HB100 , and for CDM324 use "44" ..

From where you get this constant??

Response from limpkin | March 20, 2020

Hi there!
Could you send me a quick message in private? I'll refund part of your other shipping fee... as this was due to 2 different orders on 2 different stores :).
The different values are because of their different operating frequencies! Have a look here: https://github.com/limpkin/cdm324_backpack/tree/master/datasheets_module

Thanks for your review!

Tanel | Nov. 18, 2019

Very good product for its price

I used this sensor in a university project with a group of people not very familiar with electronics and programming and it worked just fine. It is not perfect for measuring speed, but functions well for its price and is relatively easy to use.
Buying experience was excellent - seller answered my questions quickly and product shipped in a speedy manner.

Bernardo | Oct. 31, 2019

Very good!

Hello!
The hb100 that I bought you has good reading range. But the sensors that I get here in Argentina, are different and have little reading range, only 2 meters.
For example, yours is "ZH100" and those here are "MX100" or something similar.
Do they change anything?
The screw it brings, what is it for?
Would it serve to adjust the distance of the sensors that I get in my country?

Response from limpkin | Oct. 31, 2019

Hello!
I'm afraid I'm not familiar with these MX100...

Alexander | Dec. 1, 2018

questions about FOUT )

Hi... I recently purchased this module for detection moving people in the room.
External view of module is very good, and from VOUT output i have useful signal (>2.5V wheh i moved)
But I have a questions.
1) If I have not moving in room with your sensor, what sighal i have in FOUT ?
I think 0, but i have not null frequency.
2) And you in your speed measure's sample for arduino you connect FOUT to digital input of arduino.
But output FOUT of sensor is analog signal, isn't it ?
Why he is connected to digital input ?

Response from limpkin | Dec. 1, 2018

Hello,
1) You'll see noise on the FOUT output, which is why it is important to make sure that VOUT is relatively high to take into account FOUT.
2) FOUT is digital, VOUT is analog.
Would you modify your text content with a review? Thanks!

Kok | June 28, 2018

Great prodcuct! Works very well!

I bought this product for my school project and it works very well. The seller is very helpful and gave me assistance when i faced problems using the product. I am really grateful to him for all his help! Thanks Mentor Mathieu!

Aditya | Dec. 11, 2017

Quick delivery, great communication

Ordered on expedited delivery and received it in 4 days which was fantastic. Had it up and running within 5mins of unpacking.

All communications were very quick and helpful. Highly recommend it.

Daniel | Nov. 27, 2017

HB100 Doppler Speed Sensor

The sensor work very well . This module is in accordance with the documentation and works correctly. He arrived quickly and in good conditions. I recommend all buyers.

Martin | Aug. 24, 2017

Doppler radar module & interface.

Not having the resources to manufacture a suitable interface for the Doppler Radar module myself, this was a welcome surprise when I came across it. It does exactly what I want at a reasonable price.

Joseph | Aug. 31, 2016

Seller should post simple testing code. Works ok, not great

Purchase was easy and shipping was very fast with great tracking.
Hooked this up to a breadboard that I also tested the parallax microwave doppler, and another brand from China on. This one had some problems. It sends a continuous signal and doesn't stop, even when there's no motion. I checked the hook up wires to the board and they are correct. Not sure why it's doing this. I used the same exact program and ardiuno uno microprocessor as for the parallax and china models. It might be something in the programming, not sure, but as of right now, I am not able to use this 'tindie' sensor. Hopefully it just needs an adjustment somewhere, maybe in the programming. I did take notice the difference in sensor structure, this one being an HB100 and the other two being GH-719. Not sure if that has anything to do with it.
**It would be extremely helpful if the seller could post some simple testing code for arduino.**

Response from limpkin | Aug. 31, 2016

Hello Joseph,

I'm very sorry about your experience and would have wished you'd have contacted me before to request assistance for your project, as I'd be more than happy to help you.
I'll provide a sample code on this page soon.

Regards,
Mathieu

Rene | Aug. 16, 2016

Good product!

I had bought some bare HB100 sensors before, just to see the IF output on a scope. This module, with an amplifier, gives a good understanding of how the output can be actually used and interfaced with a microcontroller.
Many thanks!!

Nigel | July 28, 2016

Overall A Good Board

Just interested in seeing how doppler radar works.

Concentrating on the digital output, I certainly see a change if I walk away or toward the unit at different speeds, but I cannot correlate the speed to a 'scope frequency.

Very wary about write microcontroller code for this as things are the moment.

Response from limpkin | July 28, 2016

Hello,

Could you double check your complete setup? You should get the exact same behavior shown in the demonstration video.
Because of the way the Doppler effect works, the only reason for a given output signal frequency is the speed of the object moving in front of the sensor.

Regards

Solène | May 30, 2016

Need help

Hello i have read the documentation and i think the high pass filter is to low
I would to make car speed mesurment and the velocity is 60km/h.
Your filter is designed for 72hz?
Thanks for your reply

Response from limpkin | July 12, 2016

Hello,
Actually if the sensor is right in front of the car you'll be able to measure high speeds. Have a look at this web page for reference:
http://www.limpkin.fr/index.php?post/2013/08/09/Making-the-electronics-for-a-%247-USD-doppler-motion-sensor

Regards,
Mathieu

Jean-Luc | May 4, 2016

HB100 breakout board

Hello.
Good delivery, good design.
I did not try the module yet.
On the board is written VOUT and FOUT.
I presume that those signals are prop to the speed.
But could somebody tell me if VOUT = 5VDC -----> SPEED (MPH),
or if FOUT = 32 Hz ------> SPEED (MPH) ?
Thanks for your support !
Best regards,

Jean-Luc

Response from limpkin | May 4, 2016

Hello,

Thanks for the review!
Please have a look at the application note: http://www.limpkin.fr/public/HB100/HB100_Microwave_Sensor_Application_Note.pdf

Regards

Stefano | Feb. 25, 2016

Well designed, works great

This breakout board for the HB100 Doppler sensor is very well designed and works great. It requires a few lines of code to work: nothing difficult, but for beginners this means some investigation about reading frequency from the sensor pin.
The HB100 can easily reveal movement at a distance of 8-10 m, but precise speed measurement is limited to a maximum of 2-3 meters in my experience. I think this is related to the very wide beam pattern: I'm now trying to build a reflector to make it more directional.
Shipping took some time (anyway not too much) because it was coming from China.
Great product, it is worth the investment.

Jared | Jan. 29, 2016

Sensor works great -- with great range

I have a few HB100s, as well as a Hot Wheels Radar Gun that I've been trying to rig up to an Arduino for a while now. This module made it super easy. The range is pretty decent and the sensitivity is great. Excellent product.

It'd be nice to see some example sketches, but there are a few on github that I've found. Just search hb100.

Jean-Jacques | Dec. 16, 2015

Neat product, well designed and documented :)

Nice quality item, well designed, with a nice form factor. Its (online) documentation is pretty good and I must thank its designer for his careful help and advices using this product.
Packaging was just fine.
In short: I would (and already have) recommend this product :)

Romero | Aug. 17, 2015

The product is excellent, I was up and running in one minute

The product worked as advertised, just connect to your Ardunio uno board. And you ready to go! just wish they would include software specifically designed for the HB100. I used a basic analog read function. Shipping took some time, cause it was coming from overseas,

Josh | July 14, 2015

well done board !

I had originally picked up the radar unit but after digging into it a bit; I decided it was too much work for something to play with -- while I haven't done too much with the shield since receiving it, it does make things easier. The documentation (website) has a lot of good information. Shipping was reasonable & received it quickly.
It is a shield well worth the investment!

Joseph | June 7, 2015

Everything works, but I think the bandwidth is off.

First, the unit performs exactly as designed, is well built, shows a high level of professionalism in design and execution. I used it immediately to detect movement in the room. It's sensitive enough to detect a heartbeat up close. It also reacted to rainfall outside the window. So as a detector, it certainly works, although it's difficult to discriminate and determine precisely what is being detected. It also has limited range of about ten feet indoors.

Based on the excellent documentation and product description done by Limpkin, I expected to be able to use this device to detect people moving at about 40 feet away. Unfortunately, the amplifier upper cutoff frequency is set a bit low, so the signal to the detector is already down from maximum gain by quite a bit at 100 Hz. The average person walking at 3.1 mph would generate a Doppler frequency of about 93 Hz. In fact, the signal will vary from about 60 Hz to about 100 Hz over the course of a single step, with additional frequency components at twice those frequencies due to arm and leg motion. With the bandwidth set low, it becomes more difficult to detect people moving at some distance. For this, I believe I will need another amplifier design, and I'll need to use the analog Doppler signal through FFT's to discriminate between people and other moving objects at some distance.

Response from limpkin | June 11, 2015

Hello Joseph,

Thanks a lot for the awesome review. Heartbeat detection is neat idea!
Let me know if you need a hand for this other amplifier design...

John | Jan. 12, 2015

Nice clean signal

The module arrived ready to use, just connect 5v and ground, and frequency to pin8 (with the library I used)
and bobs your uncle, the backpack is good quality, soldered to the HB100 making a robust unit.
The signal is very clean, I could have built the example circuit from agilsense website, but I doubt it would be as good,

I bought 2 units as I have a number of projects in mind,

Tarek | Dec. 13, 2014

great unique work

Would love to see Arduino code examples for this.

Paul | Oct. 20, 2014

Still hasn't turned up

Dying to try it out BUT
Said it was sent by registered post -

Response from limpkin | Oct. 20, 2014

Hello Paul,

Are you sure? tracking says you received it today: http://www.17track.net/en/result/post-details.shtml?nums=RX572403294DE

Philip | Oct. 14, 2014

High quality, does EXACTLY as advertised, a great component

A perfect solution for my arduino project, just apply 5V and you get a square wave output of the dopler shift, and an analog "signal strength" output. It's clean, seems both well designed and constructed. A little software to measure frequency and do some filtering and voila - speed measurement. It's coming from Hong Kong, so may take a few days to get to yah, but overall very well done.

Gedeon | Oct. 1, 2014

Good, clean and clear service

The product comes with no operating documentation whatsoever but the hardware design is neat, good solders and completely published too.

Delivery & ordering was completely painless and easy.

Iliya | Oct. 1, 2014

Excellent sensor

This radar is very suitable for education of pupils and students, moreover it's very easy to program and use it by Arduino.
It is working perfectly !
Many thanks and admiration to the author.

Noah | May 24, 2014

No complaints, excellent product

Got this relatively quickly, given that it was sent from China (via Switzerland (?))

Was able to hook it up and see signal in less than two minutes. Very easy to interface with!

I'd love if next version included a frequency counter so one could just get a speed-to-voltage output going...

AKA

Charles | Dec. 6, 2013

HB100 breakout board

I received this in good condition. I haven't used this in an application but I did set it up on the bench for testing. The HB100 seems to have a fairly substantial integrator... or I'm assuming that's what it is. Maybe it's just a function of the device? I've never really worked with a detector like this before so maybe that's just how they respond? Interesting device and I can see a use for this in a project in the near future. Excellent product, I highly recommend this.

+ Show 23 more