Fargo R4ADI is a TCP/IP web based Ethernet I/O relay control & monitoring board with a built in web server. It has 4 relay outputs, 4 optically isolated digital, additional Fargo R4ADI has 4 analog inputs. With POE (Power over Ethernet) enabled, Fargo R4ADI is easy to install and connects through your Ethernet connection without the need for additional power, providing you tremendous cost-savings and flexibility when installing Fargo R4ADI in your control system.

Fargo R4ADI digital input data can be used to calculate a range of results such as: State: This is useful for knowing if an input is on or off, like a door switch being on or off. Counter: Non-resettable/resettable counter. Frequency: Counts the frequency of an input in KHz (kilo hertz or1/1000 seconds). This could be useful in displaying a tachometer where 60Hz = 1 R.P.M. Period: In 1/1000 seconds an input in kHz (milli-seconds or 1/1000 seconds). This would be useful for measuring timed events.

The analog inputs allows Fargo to read the value of external equipment. Two of the analog inputs are non-isolated, use provided power for eliminating ground loops, provides 5VDC@30mA 3.3VDC power source, PTC protected, 3 conductor screw terminal connector for each (3.3VDC, input, ground). The other two of the analog inputs are specifically designed for interfacing to current sensors allowing current monitoring of external equipment.

With Fargo R4ADI, you can control and monitor the relays and inputs with standard web browsers or our smartphone Apps. As part of the software there is a built in scheduler and you can also control & monitor the board thru RESTful commands.

Fargo R4ADI is an ideal web control and monitoring solution for applications such as security, access control, remote power switch, current monitoring, industrial equipment monitoring, building automation system, environmental monitoring, HVAC system and much more.

Fargo R4ADI smartphone Apps allow you to add new relay boards when you need to grow your system, this makes it easy to manage all your devices in one place.

Features

• Ability to interface to current sensors to monitor the current being used by external equipment.
• No 3rd party server and no monthly fees.
• Free Android & iPhone Apps.
• Email alerts of various user selectable events
• Multiple events scheduler.
• Over 10,000 item log.
• NTP automatic internet time setting.
• Automatic unit discovery
• Completely configurable network settings including static or dynamic IP.
• Built in DYNDNS interface.
• Password protection.
• Ease-of-use web interface that provides quick access to setup and manage your devices.
• Built in sensors for system voltage and temperature monitoring.
• Input measure state, frequency period, or as a counter.
• Easy to add new boards to the system as needed.
• Program and web page interface are upgradable over the internet.
• Bare board for easy installation in your existing control system.
• POE (Power over Ethernet) enabled.
• Designed, developed and made in USA.
• Custom, Semi-Custom, OEM services available.

Specification

• 10M/100M RJ45 Internet interface with connection and activity LEDs
• 4 1-Form-C relays 3 conductor screw terminal connector for each (normally open/common/normally closed)
• 2 optically isolated, 2 pull down for contact close digital inputs, 2 conductor screw terminal connectors for each. Connect the 2 terminals to make input.
• 2 Analog 0-5 VDC Inputs 30mA 3.3VDC power source PTC protected. 3 conductor screw terminal connector for each (3.3VDC, input, ground)
• 2 Current sensor inputs. 3.5mm stereo jack connector for each
• Relay LED indicator
• Heartbeat (pulse) running indicator
• Status LEDs (pulse, bootloader, and locate)
• Ethernet Bootloader (for server hardware code upgrade
• POE or 12VDC @500mA (nominal) (110/220VAC input plug in power supply included)
• AC converter supplied, 100-240VAC50/60Hz
• 1 meter CAT5 cable supplied
• Web interface w/basic authentication
• 10,000 event log system
• On board temperature sensor and voltage sensor
• Free software upgrades
• Reset push-button
• Locate push-button
• Working Temperature from 0 to +70 Celsius
• Storage Temperature from -40 to +125 Celsius
• Humidity from 10% to 80% non-condensing•
• Dimensions 74mm x 100mm x 20mm, mounting holes 64mm x 92mm Ф 3.2mm 4 places
• Supported Protocols: HTTP/HTTPS/SMTP/SNTP