ESP PROG V1 : ESP USB Serial Adapter & Programmer

Name: ESP PROG V1 : ESP USB Serial Adapter & Programmer
SKU: 29231
Price: 10.00 USD
Availability: OutOfStock
Rating: 5.00 (2 reviews)

(2 Reviews)

It can be used in multiple ways like use it for programming ESP8266, ESP32, or any other microcontroller which needs boot Pin and Reset Pin

Designed by MAKERPALS in India

ESP PROG V1 : ESP USB Serial Adapter & Programmer 1

ESP PROG V1 : ESP USB Serial Adapter & Programmer 2

ESP PROG V1 : ESP USB Serial Adapter & Programmer 3

ESP PROG V1 : ESP USB Serial Adapter & Programmer 4

ESP PROG V1 : ESP USB Serial Adapter & Programmer 5

$10.00

Out of Stock

Sold out since Jan 30, 2025

It can be used in multiple ways like use it for programming ESP8266, ESP32, or any other microcontroller which needs boot Pin and Reset Pin

Ready to Ship in 12hours Batch Update As of 15.03.2024, We have re-stocked the ESP Prog Board in a batch size of 20 pieces. Orders are processed in 24hours As of 31.03.2023, We have re-stocked the E…

Ready to Ship in 12hours

Batch Update

As of 15.03.2024, We have re-stocked the ESP Prog Board in a batch size of 20 pieces. Orders are processed in 24hours

As of 31.03.2023, We have re-stocked the ESP Prog board in a lot of 50, Order processing time has been now reduced to 12hours.

As of 4.02.2023, We have re-stocked the ESP Prog Board in a lot of 20. Orders are fulfilled in 24hours

This batch is now RoHS Compliant for EU Customers

What is it?

ESP Prog is ESP32 Programmer board. It can be used in multiple ways like use it for programming ESP8266, ESP32, or any other microcontroller which needs boot Pin and Reset Pin control along with UART RX, and TX for flashing the MCU with a new program. Or one can also use it as a USB to UART adapter.

Why did you make it?

In the last couple of months, we designed quite a few custom-embedded products for our customers where we used ESP32 for Wi-Fi connectivity. The challenge we faced was with the ESP32 Flash programming once the board is ready. There is no ESP32 programmer board available in the market that can be used for programming the production boards easily. Atleast we were not able to find it easily which we can buy and use it. Do you know any, please do share them with us? To handle the situation, we had to use readily available ESP32 Dev kits, we took out the ESP32 module from them, and then took RX, TX, Boot, and Reset pin along with 3.3V and GND signals onto a header connector via small cable and used it as ESP32 programmer. See the image below 👇

What makes it special?

Compact size: 50mmx30mm
USB-C Type Interface: you can connect a USB in any direction. Use USB-A to USB-C Cable.
LEDs for Power, RX, TX
Switch for Reset and Boot
Both 3.3V and 5V are available on the O/P connector
All signals on a standard 2.54mm Pitch Header (Header will come along with the board (unsoldered))

No country selected, please select your country to see shipping options.

Change Destination Country:

MAKERPALS Shipping Policy:

Shipping Policy

The orders are now processed within 24 hours. We may pre-pone or post-pone the delivery for any gazetted holiday in INDIA.
Shipping methods are facing 97.66% accurate transit time (As of 22nd November 2024), Please note that some shipping charges don't include insurance of the consignment.
Projects involving batteries will be shipped Excluding the batteries due to IATA regulations.
The offerings from MakerPals are shipped from the "Bhārat Gaṇarājya" (Republic of India). The prices shown for the products here are Shipping Insurance/customs/ taxes/duties excluded. NOTE: The buyer has to pay for the customs/taxes/VAT solely if any levied on the order. For most of our shipments, Customs is rarely charged, but please be informed, the incoterms for all the shipment are "CIF" only.
In the event of any discrepancy in the customer's shipping details, whether intentional or unintentional, we reserve the right to contact the customer via the provided phone number or email. If the order is shipped and returned to us, we will attempt to communicate and allow a response within one month. After this period, the order will be marked as abandoned, and no refund shall be issued.
We charge Flat Fee as Shipping Charges, so you can now add multiple products or items under one shipping at no extra cost. The weight is no more a restriction when ordering from us.

For disputes, Email shipping@makerpals.in with the order ID and subject. We shall revert at the earliest.

Return Policy and Warranty We adhere to providing you with 100% genuine products and services, still, if we make any mistake with your order regarding the quality or shipping, we will definitely help you out with a resolution within 48hrs. Bring any such irresponsibility to our notice at the earliest. User-made errors in the product are not liable for replacement.

Review Breakdown

Average Ratings

Product: (5.00)

Documentation: (5.00)

Shipping: (5.00)

Communication: (5.00)

Henk | Nov. 3, 2023

Astonishing quality PCB

Nice little programmer for your DIY ESP projects. Allows you to easy "offload" the (space consuming) programing logic from your own PCB and switch to OTA only. Rarely seen such good quality PCB. From the placement and the soldering, to the silkscreen and smooth PCB edges. Shukriya!

Response from MAKERPALS | Nov. 9, 2023

Shukriya! Henk for this nice review. We are glad to know that you loved the Product Quality and Are satisfied with the Overall Order Experience.

Regards
-Your MAKERPALS

Colette | April 9, 2023

Impressive USB-C ESP PROG V1

Recently! Got this ESP Prog V1 CP2102 USB-C programmer. They shipped it super carefully, and the packaging was top-notch. The programmer itself is slick, small, and idiot-proof. The USB-C thing makes data transfer crazy fast, perfect for tinkering with ESP8266 and ESP32 gadgets. It's got handy buttons for resetting and booting, so programming my ESP32 projects is a piece of cake now. The instructions from CAPUF are like ABC, so setting it up was a breeze. Big shoutout to MakerPals – they got it to me in the UK in just 13 days. Every penny spent was totally worth it.

$10.00