Unsoldered White GoPro Hero Connector, Comes in 7 Pieces. Easy to Assemble. Make your own custom GoPro cable. This hard to find connector makes it possible. Color: White

Fits:

• GoPro Hero
• GoPro Hero2
• GoPro Hero3

*GoPro Hero Not Included.

GoPro HeroBus Pinout (YMMV)

• pin I/O label description remark
• 1 - GND ground
  
• 2 I/O I2CSCL I²C clock (pulled up by camera)
• 3 I/O I2CSDA I²C data (pulled up by camera)
• 4 - GND ground
  
• 5 I BATTIN battery input
  
• 6 I BATTIN battery input
  
• 7 O 3V8OUT unregulated power out 3.8V 0V when camera is off.
• 8 O 3V8STBY unregulated power out 3.8V always keep 3.8V unless battery is out.
• 9 I BPRDY bacpac ready set low I²C EEPROM to be read by camera. (pulled up by camera)
• 10 I VSYNC 3D genlock vertical sync [LCD touch bacpac only: pulled up. set low to sleep LCD touch bacpac]
• 11 - PIN11 [LCD touch bacpac only: low on audio ready]
• 12 - PIN12 [LCD touch bacpac only: high on video ready]
• 13 - PIN13
  
• 14 I TRIG 3D sync trigger
• 15 I I2CINT I²C interrupt read request from slave. (pulled up by camera)
• 16 I AUDIOIN_L left mic in impedance 2.2k, reserved power bias 3.3V, unbalanced
• 17 I AUDIOIN_R right mic in impedance 2.2k, reserved power bias 3.3V, unbalanced
• 18 - PIN18 [LCD touch bacpac only: playback button] (pulled up by camera)
• 19 I PWRBTN power/mode button (pulled up by camera)
• 20 I HSYNC 3D genlock horizontal sync [LCD touch bacpac only: left audio out]
• 21 - PIN21 [LCD touch bacpac only: right audio out]
• 22 - GND ground
  
• 23 I/O USB_D− USB D−
  
• 24 I/O USB_D+ USB D+
  
• 25 - USB_VBUS USB VBUS charging camera battery through this pin is not possible.
• 26 - USB_VBUS USB VBUS charging camera battery through this pin is not possible.
• 27 - PIN27
  
• 28 O HBUSRDY high on Herobus ready
  
• 29 O VIDEO composite video out
• 30 - GND ground

Designed for use with GOPRO® products. GOPRO® is a registered trademarks of Woodman Labs, Inc. in the United States and other countries.