The PodBreakout brings all 30 pins from the iPod, iPhone, and iPad dock connector and makes it easy to solder wires to. Includes soldered PodBreakout Board and Style 1 connector.

Fits iPhone, iPod and iPad.

Pinout

• Pin Signal Description
• 1 GND Ground (-), internally connected with Pin 2 on iPod motherboard
• 2 GND Audio & Video ground (-), internally connected with Pin 1 on iPod motherboard
• 3 Right Line Out - R (+) (Audio output, right channel)
• 4 Left Line Out - L(+) (Audio output, left channel)
• 5 Right In Line In - R (+)
• 6 Left In Line In - L (+)
• 7 ?
  
• 8 Video Out
  
• 9 S-Video Chrominance output for iPod Color, Photo only or Component Video Y
• 10 S-Video Luminance output for iPod Color, Photo only or Component Video Pr
• 11 AUDIO_SW
  
• 12 Tx ipod sending line, Serial TxD
• 13 Rx ipod receiving line, Serial RxD
• 14 RSVD Reserved
  
• 15 GND Ground (-), internally connected with pin 16 on iPod motherboard
  
• 16 GND USB GND (-), internally connected with pin 15 on iPod motherboard
• 17 RSVD Reserved
  
• 18 3.3V 3.3V Power (+)
• 19,20 +12V Firewire Power 12 VDC (+)
• 21 Accessory Indicator/Serial enable
  
• 22 TPA (-) FireWire Data TPA (-)
  
• 23 5 VDC (+) USB Power 5 VDC (+)
• 24 TPA (+) FireWire Data TPA (+)
  
• 25 Data (-) USB Data (-)
  
• 26 TPB (-) FireWire Data TPB (-)
  
• 27 Data (+) USB Data (+)
• 28 TPB (+) FireWire Data TPB (+)
  
• 29,30 GND FireWire Ground (-)