--- Kit includes all components required to build EXCEPT the 3D printed parts and laser module! ---

Please note: We are only shipping to the United States

Instead of being a laser engraver where you bring the piece to the engraver, we have designed the Engravinator to be an engraver that you bring to your work piece. For example, if you are building a large piece of furniture, you would clamp the Engravinator down to your work piece to engrave your maker's mark.

Being completely open source, you could head over to Engravinator.com right now and find a complete Bill of Materials and build guide to create your own. However, we are providing these kits to help avoid the hassle of aggregating all the components, saving you time and money.

The Engravinator is sold only as a user assembled kit but, but fear not, we provide an extensive build guide and it should only require 4-8 hours with minimal tools, depending on skill.

The Engravinator was designed to use our very own Platypus Laser Controller which can also be found here on Tindie. The controller is included with the kit.

Technical Specs

• 130mm x 130mm working area
• 345mm x 305mm x 245mm (W x D x H) overall size
• Under 5kg total weight at full spec
• Supports common PWM diode laser modules (not included) with a 16mm x 40mm M3 mounting pattern
• Up to 10,000 mm/min on X and 6,000 mm/min on Y travel speed
• 10 micron resolution (using 1/16 micro-stepping)
• 8mm linear rods and bearings on both axis
• Rigid 2020 aluminum extrusion frame
• Full enclosure for maximum eye safety

Note: We do not sell this kit with the required laser diode module for a few reasons. Mainly because there are a variety of options you might want and the market price varies quite a bit. Check out the "Laser Module" section in our BOM Guide for more details.