Easy to use nixie tube driver - only 3 control lines 5V or 3.3V. Multiple drivers can be connected in series. 10 high-voltage outputs.
Designed by Marcin Saj in PolandThis seller is taking a break. Sign up below to get an email when they're back!
Sign up and we'll send a reminder when the seller returns!
NIXIE TUBE DRIVER V1 If you are a maker or nixie enthusiast, you have probably used or had contact with a nixie tube drivers e.g. 155ID1, 74141. Unfortunately, these drivers have their technical limi…
Read More…If you are a maker or nixie enthusiast, you have probably used or had contact with a nixie tube drivers e.g. 155ID1, 74141. Unfortunately, these drivers have their technical limitations for modern projects. Sometimes VFD or AC electroluminescent display drivers (such as HV5812 or HV5530) are used to control nixie tubes but they are mainly suitable for dedicated applications and the lack of flexibility in control and power supply or even in assembly (smd) effectively discourages experimenting with new nixie tube designs. *The nixie driver is assembled - only pin headers require soldering. The nixie tube is for illustrative use only and is not included.
An alternative solution may be a new nixie tube driver:
***Please note that nixie tubes require additional 170V power supply.
Libraries for use in your own project:
The sample program code has been prepared to show that the control is very simple and basic knowledge of the Arduino is enough.
Sign up and we'll send a reminder when the seller returns!
/i/428481/products/2019-12-23T18%3A09%3A51.648Z-nixie-tube-driver_03.jpg?1606306133)
