LoraWan kit made By:

• Custom LoRa Radio Shield for WeMos D1 mini with RFM95 868Mhz
• Original WeMos D1 mini Pro board based on ESP8266 SoC
• Original WeMos OLED Display 64x48
• 3 dBi SMA Antenna for 868Mhz

All components are assembled and tested!

Start immediately to experiment Lora / LoraWan capabilities with this kit. It can be configured as LoraWan Node or LoraWan Single channel gateway. Software is made for Arduino IDE.

Fully compatible with "The Things Network" (ttn) in Europe on 868Mhz band

Both Hardware and Software are opensource and shared on github:

• https://github.com/marcobrianza/Lora_Node_1.3
• https://github.com/marcobrianza/ESP-1ch-Gateway-v4.0/tree/LoraNode_1.3

To program the WeMos D1 board the ESP8266 Arduino core is required https://github.com/esp8266/Arduino/
Additional Arduino libraries are required, follow readme on github of the projects

Why should I buy this kit instead of another one?

• It is available now (September 2017)
• Its proven to work well on The Things Network
• Its fully Open Source Hardware and Software including the LoraWan stack
• It can be configured as LoraWan node and single Channels Gateway
• It comes with a proper Antenna
• It comes with good software examples to test the different LoraWan parameters: Radio Power, Spread Factor / Data Rate, Port, Data length, Acknowledgment, uplink / downlink message
• You can customize it with several shields from WeMos