What is it?

Fujinet is a series of devices that provide disk or hard disk emulation via SD card, and via WiFi connection.

Any disk image is loaded from Internet or via SD card.

It is also useful to use BBS, vintage internet chat systems, and other internet based services using a classical computer platform.

Currently Fujinet supports Atari 8 bits - Coleco Adam and Apple II computers.

This model is intended for Atari 8 bits (400/800 - XL and XE series) and Coleco Adam computers in a single device; for each computer a different wire set is used.

Why did you make it?

Its a customized version from the original in order to fusionate Fujinet for Atari 8 bits and Fujinet for Coleco Adam.

What makes it special?

2 in 1 Fujinet device, bought one unit, a pair set of wires, and use it for Atari 8 bit computers and Coleco Adam, using the same Fujinet hardware.

Recommendations:

PLEASE NOTE: FujiNet is powered by the Espressif ESP32 chipset, which works on 2.4GHz WiFi networks ONLY. If you are using a "mixed" 2.4GHz/5GHz WiFi network (using both radio bands with the same SSID), you MAY have problems connecting your FujiNet device with other devices on the network.

Firmware update:

You can download the FujiNet-Flasher (for Windows, macOS, or Linux), from https://fujinet.online/download/. For more information, see FujiNet-Flasher.

Update procedure is performed via the micro USB port of the Fujinet device. Its as simple as plug the USB cable, select the Atari 8 bits or Coleco Adam platform firmware and click update device.

USB to Serial driver for this ESP32 board model is attached here, at page bottom, under source code.

Videos:

Atari 8 bits: https://youtu.be/_1_GGwkDpXk

Coleco Adam: https://youtu.be/c0pwmi6F7UQ

Coleco Adam wire set:

Do not hesitate to contact requesting Coleco Adam wire set restocking, currently I have no stock of RJ cables for Adam, but these can be restocked easily on demand,