Enclosure for Raspberry Pi 3 and LiFePO4wered/Pi+

Name: Enclosure for Raspberry Pi 3 and LiFePO4wered/Pi+
SKU: 13679
Price: 14.99 USD
Availability: OutOfStock
Rating: 4.75 (1 reviews)

(1 Review)

Acrylic enclosure for the Raspberry Pi 3/3+ and the LiFePO4wered/Pi+

Designed by Marty Rice in United States of America

This seller is taking a break. Sign up below to get an email when they're back!

Enclosure for Raspberry Pi 3 and LiFePO4wered/Pi+ 1

Enclosure for Raspberry Pi 3 and LiFePO4wered/Pi+ 2

Enclosure for Raspberry Pi 3 and LiFePO4wered/Pi+ 3

Enclosure for Raspberry Pi 3 and LiFePO4wered/Pi+ 4

Enclosure for Raspberry Pi 3 and LiFePO4wered/Pi+ 5

Enclosure for Raspberry Pi 3 and LiFePO4wered/Pi+ 6

2018-08-01T13:21:10.798Z-enc-lifepo4weredpiplus.jpg

2020-05-02T13:30:45.467Z-lipopipluspi4.jpg

2020-05-02T13:30:45.467Z-lipopluspi4rear.jpg

2020-05-02T13:39:27.122Z-lipopluskit.jpg

2020-05-02T13:39:27.122Z-20180817_162814.jpg

$14.99

On A Break

Acrylic enclosure for the Raspberry Pi 3/3+ and the LiFePO4wered/Pi+

This is an acrylic enclosure for the Raspberry Pi and the upcoming LiFePO4wered/Pi+ battery UPS made by Silicognition. It was specially designed to fit the newer device and is made from laser-cut ac…

Updates

This design is similar to my previous models for earlier LiFePO4wered/Pi models, but other than the dimensional changes I have made a few improvements:

The aluminum standoffs are now outside the enclosure so that they don't interfere with any internal devices or circuits you may have cobbled onto your Pi
The exterior screws are counter-sunk to give a nicer aesthetic
There is a fan built mount in the top panel for cooling.

Kit includes:

6 Acrylic laser-cut panels
40mm 5VDC fan (requires soldering to connect it to the LiFePO4wered/Pi+).
All of the screws, nuts, and nylon / aluminum standoffs to assemble it.

Kit does not include either the Raspberry Pi or the LiFePO4wered/Pi+

The overall height of the enclosure is 47mm (outer dimensions).

No country selected, please select your country to see shipping options.

Change Destination Country:

Review Breakdown

Average Ratings

Product: (4.00)

Documentation: (5.00)

Shipping: (5.00)

Communication: (5.00)

Everett | July 6, 2019

fit and finish is perfect - the fan however is the weakest

Link.

Others have said it has a loud fan - and it does. I ordered 2, the first was loud, the second fan had a broken red wire under the label - I contacted the supplier and a new fan showed up in the mail in like 2 days - and yes it is loud too. I tried bying the top of the line fans and it is loud also - the trick might be to solder a small 1-2 ohm resistor in series with the red power lead - those fans spin way to fast and that rpi doesn't need that much air - it might take off!

EFB

$14.99