Note:

1. Please read the instructions carefully. After assembly, you need to install the battery. The type-c port is only used for charging and flashing, not power.

2. Do not connect the battery in reverse, as this may burn out the motherboard!!! (Warranty will be void if the motherboard is burned out due to reverse connection of the battery)

How to turn on the machine: 1. Unplug the charging cable after installing the battery. 2. Turn on the power in the middle and press and hold the encoder for 3 seconds.

Welcome to Full Band Radio V5A Edition. This product includes two modes of digital/analog output. The digital output is driven by a Class D power amplifier, and the analog output is driven by an analog operational amplifier. In different modes, this product supports different functions: Analog output mode: Analog output mode: supports frequency modulation FM, amplitude modulation AMM (medium wave MW/short wave SW) aviation band, single sideband SSB (LSB lower sideband/USB upper sideband) Full band radio: • FM: 64Mhz-108MHz; • AM medium wave MW: 520KHz-1710KHz • AM shortwave SW: 3.5MHz-30MHz • AM Single Sideband SSB: 3.5MHz-30MHz (BFO adjustment 0-2000Hz) • Aviation band: 118MHz-137MHz; * UHF expansion(Not includes): supports UHF band reception/transmission function through expansion board (please comply with local laws and regulations)

Package includes:

Set #1:

1 x Finished product kit

• Packing weight: 235g
• Packaging size: 11.5x11.5x3.5cm
• Packaging: plastic box + bubble bag

Set #2:

• 1 x Finished product kit
• 1 x medium wave antenna
• 1 x short wave antenna

• 1 x high impedance amplifier

• Packing weight: 415 grams

• Packing size: 16x13x6cm
• Packaging: plastic box + paper box