Features:

• Easy to install and easy to carry
• With a slidable cover on the remote control
• With a hook on the remote control
• Use Learning coding, stable and reliable
• The wireless signal can pass through walls, floors and doors
• You can turn on or turn off the receiver with transmitter (remote control) from any place within a reliable distance
• Operating Voltage: DC12V
• Maximum Load: 10A
• Operating Frequency: 433MHZ (in set)
• Receiver Sensitivity: -100dBm
• Encoding Type: learning code
• Board Size: Approx. 5.3x3.1cm/ 2.09x1.22"

Output Working Way:

1. Jog: Pressing one button is working. Loosing your finger on the same button is stop. (need one channel switch and one buttons remote control)

2. Self-lock: Pressing one button for one time is working. Pressing the same button again is stop (need one channel switch and one buttons remote control)

3. Inter-lock: Pressing one button is working. Pressing another button is stop (need one channel switch and 2 buttons remote control)

4. Please notice that here is 1CH and 1 button wireless remote control. You can choose the self-lock or jog working/ output way, you better choose jog or self-lock, so pressing the button is open, and pressing again is close, or pressing is open, and loosing finger is close

Learning and Remove Method:

1. Press the learning code. The indicator from on to off, loosen your finger, press any button of the remote control, the indicator flash 2 times and off. It mean you learn it successfully

2. It can learn more than 12 PCS 2262 or 1527 chip with the different code wireless remote control

3. Remove/ Clean: Press the learning button about 8 seconds, the indicator turn on to off, it means the information that you keep have been removed successfully

Package Included:

• 1 x Learning Code Receiver
• 1 x Remote Control