What is it? This is a kit. You will need soldering tools and supplies. Use at least a 4 to 8 Ohm, 10W speaker; none is supplied

Why did you make it?We have adapted the Big Muff Tone Stack and our version sounds great. It has a Tone and a Body control which are both active.

It will accept your guitar input via a 1/4" phono jack with a high-impedance FET. The guitar sound is then routed thru a Big Muff Tone Stack which consists of a Tone and Body controls. It is then fed to a pre-amplifier prior to going into a 14-Watt audio amplifier. Connect the output to your speaker cabinet for a neat experience. The PCB is is approx 5.5" wide x 2.5" deep.

The output is available at a 1/4" phono jack AND at a 2-pin Screw Terminal. You get both in the kit.

What makes it special? The operating voltage is 12vdc. It has two 1000uF Capacitors on the input power for additional filtering. You will need a 12vdc power supply capable of delivering at least 2 amps; a 20-watt or better power supply will work just fine. This is the fourth 14-Watt Guitar Amplifier Kit we offer with different Tone Stacks.