With this wall mount, you can reclaim the desk space occupied by your NAS. Hang your NAS right beside your router or switch or mount it to the side of your desk.

To reduce the hassle with the power supply cables, the power supply itself has its own compartment right below the NAS.

Items delivered:

• Wall mount in four parts. (Just click the pieces together!)
• Two retaining clips for the power supply.
• Screws and Dowels (for 8mm drilled holes)

Variants:

• 75: Width of NAS below or equal 75mm

• 105: Width of NAS below or equal 105mm

• 112: Width of NAS below or equal 112mm

*1: I took most values from the internet; for any unverified NAS, please check the width of the actual NAS before ordering. I will appreciate your measurement feedback and will report your NAS as 'verified' here!

Dimensions of NAS:

• Maximum width of either 75mm, 105mm or 112mm
• No depth restriction
• No height restriction

Dimensions of power supply:

• Maximum width and depth: 35mm x 58mm / 1.38in x 2.28in
• Minimum length: 105mm / 4.1in
• Maximum length: 115mm / 4.5in (The mount comes with some clips for the power supply, but they will only work for lengths smaller than shown here. Without using the clips, there is no maximum length.

In case of mismatching dimensions of NAS or Power Supply, please contact me, we can work it out together!

The material of the mount is ASA. In contrast to the usual PLA, the melting point is at about 100°C / 212°F. And unlike ABS, ASA has a high weather and UV resistance, so neither direct sunlight nor heat buildup can compromise the stability of the mount.

The default color is black. Other colors are possible with some lead time (white, gray, aluminum, green, red, anthracite). Please contact me BEFORE you place your order if you are interested.