• Resolution : 800*480 pixel,24bit color
• Touch screen:Capacitive
• Interface: UART serial port
• Power supply: 4.5-5.5V
• Power consumption: 180mA@5V
• Working temperature: -20/+70°C
• Size:4.3 inch
• UI:Easy to customize the UI yourself

Support OctoPrint

you can control the octo printing from this lcd, or control the lcd printing from octopi web page.this function only works with PandaPi print mode

wiring

1.Connect it to 3D control board for example PandaPi2.5 with the XH2.54 line.

2.For previous Pandapi board that before 2020.9,We need to cut the RX line on the PCB which is already used by the chip of microUSB,so we can not use the microUSB and serial LCD at the same time.

firmware:

just uncomment of the DGUS_LCD_UI_PANDAPI in the configuration.h and compile,run.

'#define DGUS_LCD_UI_PANDAPI // for pandapi v2.5'

for other board:

'#define DGUS_LCD_UI_FYSETC // for other boards'

it compatible all the 3d printer which use marlin as it's firmware. (only test it on marlin2.0.6 )

UI source code and tools:

https://github.com/markniu/Panda_LCD800480D

those pictures of UI are based on the FYSETC LCD,https://github.com/FYSETC/FYSTLCD. instead of resistive touch and low resolution 480272, This LCD is capacitive touch and high resolution 800480 screen.

you can drop in and replace the FSY TOUCH LCD which is resistive and low resolution 480*272.

package list:

• 1*screen
• 1*line(XH2.54 4 pin)