Housing for PIR HC-SR501 + DHT22 sensor. Measuring of the motion, temperature and humidity. Installation in hollow walls. Diameter of the installation hole is 67 mm. Housing includes lens cover, which can be glued to the housing, enabling to reduce the angle from the sensor's PIR from 360° to about 180° degrees.

Description

HC-SR501

activation time: 5s - 200s
detection range: approximately 7m
detection angle: less than 120°
idle current: less than 50uA
operating temperature: -15°C - +70°C
power supply: 5-20V

Senzor DHT22

humidity range: 0-100% RH
temperature range: -40 to +80?
humidity precision: 2.0% RH
temperature precision: 0.5 °C
voltage: 3.3-5.5VDC

Installation box

Material: PETG | Color: White

Material produced by: Plasty Mladeč®

Created on: iPrusa MK2

Description of material:

The PETG material is essentially the same as the well-known PET material from which PET bottles are made. The letter G, abbreviated PETG, refers to the glycol that is added during the manufacturing process. Glycol modifies the properties of PET to make it less fragile and easier to print. It is a strong and tough material that is characterized by good thermal stability. PETG has mechanical and thermal properties better than ABS and carries PLA printing properties.

PETG Bending strength (MPa) 64 Tensile strength (MPa) 53 Deformation temperature (°C) 70 Melting temperature (°C) 140

Package includes:

Sensor HC-SR501

Sensor DHT22

Installation box

Cover for possible adjustment of the PIR's angle

Screws

More information about the product at info@opentux.eu.