PIR HC-SR501 sensor including installation box. Installation into hollow walls. The diameter of the installation hole is 44 mm. We provide a cover that can be attached using superglue, allowing the sensor's detection angle to be reduced from 360° to approximately 180°. Description

HC-SR501

activation time: 5s - 200s.
detection range: approximately 7m.
detection angle: less than 120°.
idle current: less than 50uA.
operating temperature: -15°C - +70°C.
power supply: 5-20V.

Installation box

Material: PETG | Color: White

Material produced by: Plasty Mladeč®

Created on: iPrusa MK2

Description of material:

The PETG material is essentially the same as the well-known PET material from which PET bottles are made. The letter G, abbreviated PETG, refers to the glycol that is added during the manufacturing process. Glycol modifies the properties of PET to make it less fragile and easier to print. It is a strong and tough material that is characterized by good thermal stability. PETG has mechanical and thermal properties better than ABS and carries PLA printing properties.

PETG Bending strength (MPa) 64 Tensile strength (MPa) 53 Deformation temperature (°C) 70 Melting temperature (°C) 140

Package includes:

Sensor HC-SR501

Installation box

Cover for possible adjustment of the PIR's angle

Screws

More information about the product at info@opentux.eu.