This is a rear lighting set specifically designed for 1/5th scale RC F1 cars, but can be used in other larger scale models. It provides throttle-dependent lighting action and includes a centre LED panel and two vertical wing lights. This is an adaptation of the 1/10 system - it includes a larger centre rear light panel and longer wiring, as well as your choice of connection to the ESC.

There are three throttle light patterns: - Slow blink at neutral - Fast blink on brake - Off when throttle is applied

The control board has a directly attached cable with receiver plug. Also included is a short y-cable adapter, allowing you to plug the unit into a shared throttle channel on the receiver. Alternatively, you can use channel mixing on multi-channel radios to "mix/mirror" the throttle signal to a spare channel, assuming your radio supports this.

The classic 1/10 F1 Combo has been very popular with racers around the world, and quite a few have installed them in larger scale vehicles. This set caters for the larger models directly. The longer and more flexible wiring makes installation simpler. The centre light panel features 15 high brightness LEDs in a clear resin protective coating and measures 20x25mm.

Note that the 1/5th edition doesn't support dimming, sometimes useful for indoor racing which is less common with the 1/5th cars. However, the unit leverages the configuration option to control throttle direction-sensing. This is useful for gas powered cars where throttle direction cannot be reversed in the radio setup. So, whether you have Futaba or Sanwa or something else, the solder pad can make sure that forward/brake are correctly understood.

Bring a bit of light and action to your pride and joy!

PS: The first photo is from a 1/10th car (I currently don't have a 1/5th one to showcase)