OLEDiESP a Tiny Cube with ESP07 / ESP12 + OLED IoT

Name: OLEDiESP a Tiny Cube with ESP07 / ESP12 + OLED IoT
SKU: 10193
Price: 54.95 USD
Availability: InStock
Rating: 4.50 (2 reviews)

(2 Reviews)

My OLEDiESP is a Tiny Cube with the ESP07 or ESP12E including a microSd card reader and a 0.96" OLED display

Designed by Phoenix CNC, OLEDiUNO in Bulgaria

OLEDiESP a Tiny Cube with ESP07 / ESP12 + OLED IoT 1

OLEDiESP a Tiny Cube with ESP07 / ESP12 + OLED IoT 2

OLEDiESP a Tiny Cube with ESP07 / ESP12 + OLED IoT 3

OLEDiESP a Tiny Cube with ESP07 / ESP12 + OLED IoT 4

OLEDiESP a Tiny Cube with ESP07 / ESP12 + OLED IoT 5

OLEDiESP a Tiny Cube with ESP07 / ESP12 + OLED IoT 6

OLEDiESP a Tiny Cube with ESP07 / ESP12 + OLED IoT 7

OLEDiESP a Tiny Cube with ESP07 / ESP12 + OLED IoT 8

2017-07-31T20:58:25.815Z-20170731_234248.jpg

2017-07-31T20:58:25.815Z-20170731_234217.jpg

2017-08-02T14:15:53.413Z-20170802_170214(0).jpg

2017-07-31T20:58:25.815Z-20170731_234311.jpg

2017-07-31T20:58:25.815Z-20170731_234333.jpg

2017-07-31T20:58:25.815Z-20170731_234502.jpg

2017-07-31T20:58:25.815Z-20170731_234510.jpg

2017-07-31T20:58:25.815Z-20170731_234524.jpg

Buy with confidence.

Our Tindie Guarantee protects your purchase from fraud. Learn More

Most innovated custom PCB with too many features to list. OLEDiESP version with microSD card support out now.

My OLEDiESP is a Tiny Cube with the ESP07 or ESP12E including a microSd card reader and a 0.96" OLED display

What is it? A Tiny Cube with the ESP07 or ESP12E including a microSd card reader and a 0.96" OLED display. It will be shipped with a sample code to show it's working order. One LED will be connected …

What is it?

A Tiny Cube with the ESP07 or ESP12E including a microSd card reader and a 0.96" OLED display.

It will be shipped with a sample code to show it's working order.

One LED will be connected to GP02 which will indicate if it is in programming mode or not.

Why did you make it?

It was time to go wireless. And since there is nothing comparable, I did design it.

What makes it special?

It is a tiny cube with either the ESP07 or the ESP12E.
It has a microSD card reader.
USB connectivity to upload code directly with the Arduino IDE.
It is deep sleep enabled which can be disabled.
With a simple slide switch you can either upload code or run the sketch (no push and hold of the reset button required).
It does have a reset button too of course but is not needed to upload code.
It has 3.3 volt LDO to run it from 5 volts or it can be run off a Lipo battery (not included).
4 on board LED's if requested and all pins are exposed to connect other sensors for example.

You have the choice of either white, blue or yellow/blue display and can also request to get it with the ESP07 or the ESP12E. MicroSD card is not included.