Description

This Fulcrum-D solder kit is based around a standard coin cell and two 3mm LEDs. Different than most basic solder kits, is that required assembly of the PCB to make the model airplane come to life. It has been designed for use in Flemish schools therefor all the technical specifications about the jet are written in Dutch. Once assembled the MiG-29K measure around 6 cm long. The small slide switch allows you to save your battery but can also be bypassed with a solder bridge.

Contact us for customized versions. Starting from 25 pieces we can change the PCB color or translate the text to the language of your preference.

Kit contents

• 2 x 3mm candle flicker LED
• SMD CR2032 battery holder
• SMD Slide Switch
• PCB

Assembly instructions

• carefully depanelize the PCB by bending it
• optionally file or sand the rough edges
• pay attention to the orientation of the battery holder and the LED
• bend the LED leads and solder it in place before assembling the plane
• pay attention to the polarity marks on the plane body and the baseplate
• solder the mechanical joints on one side first will allow you to make easy corrections when it's not perfectly perpendicular