usbStick (1mV Resolution) is a mini size 28 Pin USB PIC18F2553 IO Board with 13x input, output, analog and pwm pins. Also a great tool for signals monitoring (as oscilloscope), data acquisition and circuit troubleshooting at 1mSec/Samples period.

The features of iCP12 are listed as followings:

• Mini size, easy interfacing, high performance and user friendly device
• Used with PIC18F2553 28-Pin Flash USB PIC MCU
• Excellent flexibility that allows user to expand the board with plug and play modules

Peripheral Features:

• 13x IO Port (6x 12bit ADC pins, 2x 10 bit PWM/Freq/DAC pins)
• Serial port emulation (UART Baud Rates: 300 bps to 115.2 kbps)
• Supported operating systems (32bit/64bit): Windows XP ,Windows Vista, Windows 7, Windows 8, Windows 10, Linux, Mac OS X and Raspberry Pi
• Maximum Voltage: 5Vdc
• 100mA current output at VDD pin with over-current protection
• 20MHz oscillator
• Green LED - power on indicator
• 2x LEDs (Green, Red) - status indicator
• ICSP Connector - on-board PIC programming
• Switch Mode Selection - Boot or Normal mode

SmartDAQ v1.3 Features:

• Sampling channel: 6x Analogs (12bits ADC/1mV Resolution) + 7x Digitals (Input/Output)
• Maximum Sampling rate: 1KHz or 1mSec/Samples
• Sampling voltage: 0V - 5V (scalable graph) at 5mV Resolution
• Sampling period:
• mSec: 1, 2, 5, 10, 20, 50, 100, 200, 500
• Sec: 1, 2, 5, 10, 20, 30
• Min: 1, 2, 5, 10, 20, 30, 60
• Trigger Mode: Larger [>], Smaller [<], Positive edge [↑], Negative edge [↓]
• Sampling Mode: Continuous, Single
• Logging Function:
• Save Format: Text, Graphic, Both
• Start Time: Normal, Once Trigger, 24-Hour Clock (Auto Run)
• End Time: Unlimited, Data Size, 24-Hour Clock (Auto Stop)
• Recorded Data format: Graphic | text | excel

Dimension:

• Dimension: 7.0cm X 2.3cm X 0.5cm (H)
• Standard 1x5 2.54mm Pin Socket for ICSP connection
• Standard 4x6 2.54mm Pin Socket for IO Port connection

Remarks:

• Overvoltage or overcurrent may damage the MCU. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.

Layout:

Accessories List: (These accessories would be shipped together)

• 28 Pin PIC: PIC18F2553
• Preloaded Firmware: HID Bootloader + iCP12 DAQv1.4 Firmware
• iCP12 firmware can be updated using Microchip USB HID Bootloader via USB port
• NO programmer is required!

Firmware Upgrade:

• First, switch the SW1 to 'A' for bootloader mode and connect it to USB port

• Then program the iCP12 with provided firmware (iCP12_xx_Firmware.hex) file

• Disconnect the iCP12 and switch back the SW1 to 'B' for normal operation

Photos:

• with SmartDAQ v1.3

• 3.0V battery measurement with iCP12 [PIC18F2553] & Vref Off/On Comparison [improve the signal accuracy]

• All 6x ADC signals overlap together into a single line: x1, x2, x5, x10 (Zoom Scale)

• Parallel Recording in 'Text & Graphic Form' at 1mSec Sample Rate (0.5 sec/graph)

• with 'ioControl'

• with 'pwmGenerator '

• with 'adcStream'

Video:

SmartDAQ Demo: (with iCP12 usbStick & iCM32 XYZ Axis Accelerometer) Video

Download:

• Please share it for more great features: [Facebook Share]
• iCP12v1.0 usbStick: Schematic
• iCP12 SmartDAQ Firmware: v1.4
• iCP12 Software Pack v1.4 (Serial Driver, Bootloader, Firmware, SmartDAQ v1.4...): zip
• HID firmware, ioControl Demo PIC Source Code: contact us at support@piccircuit.com
• FREE Visual Basic 2008 Express Software: Link
• PIC18F2550 Datasheet: pdf
• PIC18F2553 Datasheet: pdf
• MPLAB IDE 8.40 (93.7MB): zip

Android Apps:

• Smart DAQ: Link
• Supported Device: Arduino UNO, Arduino MEGA 2560, MRP01 - AVR USB Programmer

Software:

• Software 01 - ioControl: Link (Free ioControl VB2008 Source Code): Please Contact Us to get the Source Code
• Software 02 - SerialComm: Link
• Software 03 - SmartDAQ: Link
• Software 04 - pwmGenerator: Link
• Software 05 - adcStream: Link

Third-Party Software:

• TestiCP12 interface (animations control): Link
• iCP12 IO Control for the Raspberry PI (by CWRoos): Link
• Tool for Linux and Mac OS X to support iCP12: Link

Product Reviews:

• Embedded Lab - iCP12 usbStick, SmartDAQ and Easy Pulse Sensor: Link

Other Policies

• We are not responsible for any custom duty or import tax. These charges are the buyer's responsibility.
• Please contact us if you are not satisfied with the item when you receive it.

Warranty

• Only MANUFACTURING defective product will be offered exchange or store credit.
• Damage caused by any misuse of product is not covered under warranty.

Contact Us

• Please read our policy and product description before your purchase. We will explain it in detail and satisfy your needs.
• You can message us by clicking on the 'Contact me' on the right hand side of this page.